MAX695EPE+

Series:	--
Packaging:	Tube
Part Status:	Active
Type:	Battery Backup Circuit
Number of Voltages Monitored:	1
Output:	Push-Pull, Push-Pull
Reset:	Active High/Active Low
Reset Timeout:	140 ms Minimum
Voltage - Threshold:	4.65V
Operating Temperature:	-40°C ~ 85°C (TA)
Mounting Type:	Through Hole
Package / Case:	16-DIP (0.300", 7.62mm)
Supplier Device Package:	16-PDIP
Base Part Number:	MAX695

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to MAX695EPE+ Supervisors

The MAX695EPE+ Supervisors are the latest generation of Power Management Integrated Circuit (PMIC) from Maxim Integrated. This supervisor solution provides improved power management and reliability with low power consumption. The MAX695EPE+ supervisors are built on a robust process with design layout. This design ensures optimum noise immunity with improved operating lifetime and speed of execution.

MAX695EPE+ Application Field and Working Principle

The MAX695EPE+ supervisors are used for many of the same applications as a traditional supervisor such as power supply fault detection, system reset, overvoltage and overcurrent protection. They can also be used for specific tasks such as detecting low power conditions, monitoring and controlling the saturation of linear regulators, and providing battery backup and AC failover control.At the heart of the MAX695EPE+ is a comparator circuit that continuously monitors the incoming supply voltage. When the supply voltage falls below a certain threshold, the comparator triggers a reset signal to start the monitoring process again. This is the “power-on reset” feature and it ensures that the system is operating correctly when power is first applied.The MAX695EPE+ also has output drivers that allow it to control external loads. The output drivers can be used to either switch on or switch off external switches to control power. It can also be used to control polarity, speed, and frequency of electronically controlled switches.It is important to note that the MAX695EPE+ is an analog component, and as such does not require any digital logic. This makes it very well suited for challenging environments where digital logic devices are not available or cannot be implemented with reliable results.In addition to its analog capabilities, the MAX695EPE+ has five additional functions which can be customized to a particular application. These functions are called “monitors” and they can be used to detect various signals such as current, voltage, and temperature. Each monitor has separate inputs and outputs, allowing the MAX695EPE+ to control various external loads or measure dependent signal levels.

Conclusion

The MAX695EPE+ Supervisors are a robust and reliable PMIC solution. They are the ideal device for applications requiring power management capabilities, power supply fault detection and overvoltage/over current protection. The built-in analog circuitry and integrated monitor features make the MAX695EPE+ well suited for applications where digital logic is not available or cannot be relied upon.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description