Allicdata Part #: | MAX800MCPE-ND |
Manufacturer Part#: |
MAX800MCPE |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | Maxim Integrated |
Short Description: | IC MPU SUPERVISORY CIRCUIT 16DIP |
More Detail: | Supervisor Open Drain, Push-Pull 1 Channel 16-PDIP |
DataSheet: | MAX800MCPE Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Tube |
Part Status: | Active |
Type: | Battery Backup Circuit |
Number of Voltages Monitored: | 1 |
Output: | Open Drain, Push-Pull |
Reset: | Active High/Active Low |
Reset Timeout: | 140 ms Minimum |
Voltage - Threshold: | 4.4V |
Operating Temperature: | 0°C ~ 70°C (TA) |
Mounting Type: | Through Hole |
Package / Case: | 16-DIP (0.300", 7.62mm) |
Supplier Device Package: | 16-PDIP |
Base Part Number: | MAX800 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
MAX800MCPE: PMIC Supervisors
Power Management Integrated Circuit (PMIC) Supervisors are used to monitor and protect the microcontroller-controlled system (MCU) from unexpected faults and high voltage transients. The MAX800MCPE on-chip supervisor is a small, low-power, integrated circuit which optimally monitors a variety of fault conditions, provides system power fail and low power sources, and drives a reset warning flag. Additionally, it derives one or more external reset inputs and two method-of-operation (MOP) signals, and enables debouncing and sampling of up to four system control buttons.
The main application fields and working principle of the MAX800MCPE are as follows:
Applications
The MAX800MCPE is suitable for use in applications with a wide voltage range, from 0.9V to 5.25V. It is designed for system/rail monitoring, and is typically used with positive or negative-voltage source regulators. It can also be used with primary and secondary lithium-ion batteries, and with tantalum-capacitor-based tracking, boost converters and LED drivers.
The MAX800MCPE is commonly used to monitor power failures and can be used in the automotive and office imaging environment, supporting automotive and CCD cameras. It can also be used to design voltage monitor circuits, circuit protection circuits, regulators, and PWM controllers in the industrial control, automotive, imaging, and consumer markets.
Operation Principle and Working Logic
The MAX800MCPE monitors the input voltage supply and generates an "OK" signal when the voltage is in the required safe range. This signal can be used both to reset the microcontroller, as well as to indicate that the power supply is on and the microcontroller is powered up.
The MAX800MCPE also features an external reset input, which can be triggered by external sources such as buttons, switches, or sensors. It can also be used to monitor user-selectable time-out settings, such as those required for power sequencing.
The MAX800MCPE uses two methods of operation (MOPs) for monitoring the power supply. The first is a single status bit that determines whether the input is within the expected range. The second is a fault-tolerant logic system, in which the MAX800MCPE monitors multiple voltage signals before generating an alarm signal.
The low-power MAX800MCPE requires no extra power for its operation, with only 162 µA at 5V and 90 µA at 2.5V, allowing it to be used in a wide range of applications.
Benefits of MAX800MCPE
The MAX800MCPE is a small, low-power, integrated circuit with a variety of fault protection features. It provides system power fail and low power detection, drive a reset warning flag, and offer monitoring of up to four system control buttons. It also features extremely low power dissipation and excellent voltage accuracy.
The MAX800MCPE is suitable for applications with a wide variety of sources, including primary and secondary lithium-ion batteries, tantalum-capacitor-based tracking, boost converters, and LED drivers. Its on-chip design allows for simple integration into existing circuits, offering improved reliability and a greater level of protection against unexpected faults.
Overall, the MAX800MCPE is an excellent solution for monitoring a variety of input voltages, providing easy integration with existing microcontrollers and offering protection against unexpected faults.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
MAX8790AEVKIT+ | Maxim Integr... | 53.86 $ | 2 | EVAL KIT FOR MAX8790AMAX8... |
MAX8678EVKIT+ | Maxim Integr... | 0.0 $ | 1000 | KIT EVAL FOR MAX8678MAX86... |
MAX8630XEVKIT+ | Maxim Integr... | 0.0 $ | 1000 | KIT EVAL FOR MAX8630X MAX... |
MAX88200EVSYS# | Maxim Integr... | 0.0 $ | 1000 | EVAL KIT MAX88200Outputs ... |
MAX8533EUB+T | Maxim Integr... | -- | 1000 | IC HOT-SWAP CNTRLR 12V 10... |
MAX86140EVSYS# | Maxim Integr... | 89.77 $ | 9 | EVAL MAX86140 OXIMETER/HE... |
MAX8568AETE+ | Maxim Integr... | 0.0 $ | 1000 | IC BATT MANAGE LITH 16-TQ... |
MAX8672ETD+T | Maxim Integr... | 1.74 $ | 1000 | IC MANAGE NIMH BACKUP 14-... |
MAX86150EVSYS# | Maxim Integr... | 103.95 $ | 1000 | EVAL KIT BIO-SENSOR MAX86... |
MAX8517EVKIT+ | Maxim Integr... | 18.31 $ | 1000 | KIT EVAL FOR MAX8517MAX85... |
MAX8526EVKIT+ | Maxim Integr... | 18.31 $ | 1000 | KIT EVAL FOR MAX8526MAX85... |
MAX8556EVKIT | Maxim Integr... | 0.0 $ | 1000 | EVAL KIT FOR MAX8556MAX85... |
MAX873AESA+ | Maxim Integr... | 3.53 $ | 814 | IC VREF SERIES 2.5V 8SOIC... |
MAX8533EUB+ | Maxim Integr... | 4.5 $ | 5000 | IC HOT-SWAP CNTRLR 12V 10... |
MAX8630XETD20+T | Maxim Integr... | -- | 5000 | IC LED DRIVER RGLTR DIM 1... |
MAX8630WETD25+T | Maxim Integr... | -- | 4020 | IC LED DRIVER RGLTR DIM 1... |
MAX873BESA+ | Maxim Integr... | 2.09 $ | 3 | IC VREF SERIES 2.5V 8SOIC... |
MAX8069ESA+ | Maxim Integr... | 0.67 $ | 519 | IC VREF SHUNT 1.22V 8SOIC... |
MAX8515EXK+T | Maxim Integr... | -- | 2390 | IC VREF SHUNT ADJ SC70Shu... |
MAX876BESA+ | Maxim Integr... | 2.01 $ | 368 | IC VREF SERIES 10V 8SOICS... |
MAX875AESA+ | Maxim Integr... | -- | 81 | IC VREF SERIES 5V 8SOICSe... |
MAX872ESA+ | Maxim Integr... | 0.0 $ | 1000 | IC VREF SERIES 2.5V 8SOIC... |
MAX8901BETA+T | Maxim Integr... | 1.03 $ | 1000 | IC LED DRIVER RGLTR DIM 8... |
MAX8630WETD20+T | Maxim Integr... | -- | 1000 | IC LED DRIVER RGLTR DIM 1... |
MAX8647ETE+ | Maxim Integr... | 3.44 $ | 1255 | IC LED DRIVER RGLTR DIM 1... |
MAX8790AETP+ | Maxim Integr... | -- | 66 | IC LED DRIVER CTRLR DIM 2... |
MAX8596ZETA+ | Maxim Integr... | 2.56 $ | 82 | IC LED DRVR RGLTR DIM 25M... |
MAX8069ESA+T | Maxim Integr... | 0.61 $ | 1000 | IC VREF SHUNT 1.22V 8SOIC... |
MAX876AESA+ | Maxim Integr... | 3.53 $ | 81 | IC VREF SERIES 10V 8SOICS... |
MAX875BESA+ | Maxim Integr... | 4.87 $ | 44 | IC VREF SERIES 5V 8SOICSe... |
MAX8568AETE+T | Maxim Integr... | 0.0 $ | 1000 | IC BATT MANAGE LITH 16-TQ... |
MAX8818BETM+ | Maxim Integr... | 0.0 $ | 1000 | IC PMIC 2CEL LI+ 6CH 48TQ... |
MAX8818AETM+ | Maxim Integr... | 0.0 $ | 1000 | IC PMIC 2CEL LI+ 6CH 48TQ... |
MAX8818BETM+T | Maxim Integr... | 0.0 $ | 1000 | IC PMIC 2CEL LI+ 6CH 48TQ... |
MAX8818AETM+T | Maxim Integr... | 0.0 $ | 1000 | IC PMIC 2CEL LI+ 6CH 48TQ... |
MAX8682ETM+T | Maxim Integr... | 0.0 $ | 1000 | IC PMIC 2CELL LI+ 6CH 48T... |
MAX8682ETM+ | Maxim Integr... | -- | 1000 | IC PMIC 2CELL LI+ 6CH 48T... |
MAX8904ETN+ | Maxim Integr... | 0.0 $ | 1000 | IC PMIC LI+ 2CELL HANDHEL... |
MAX8904ETN+T | Maxim Integr... | 0.0 $ | 1000 | IC PMIC LI+ 2CELL HANDHEL... |
MAX8904AETN+ | Maxim Integr... | 0.0 $ | 1000 | IC POS PMIC LI+ 56TQFNBat... |
IC BATTERY BACKUPSupervisor Channel
VOLTAGE DETECTORSupervisor Open Drain or...
IC VOLT DETECTOR TO-92-3Supervisor Open ...
IC VOLT DETECTOR TO-92-3Supervisor Push-...
IC SUPERVISOR MPU 4.65V WD 8SOICSupervis...
IC SUPERVISOR 2.9V 4-USPSupervisor Open ...