MAX800MESE+

Series:	--
Packaging:	Tube
Part Status:	Active
Type:	Battery Backup Circuit
Number of Voltages Monitored:	1
Output:	Open Drain, Push-Pull
Reset:	Active High/Active Low
Reset Timeout:	140 ms Minimum
Voltage - Threshold:	4.4V
Operating Temperature:	-40°C ~ 85°C (TA)
Mounting Type:	Surface Mount
Package / Case:	16-SOIC (0.154", 3.90mm Width)
Supplier Device Package:	16-SOIC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to MAX800MESE+ Application Fields and Working Principle

The MAX800MESE+ is a power management integrated circuit (PMIC) supervisor that provides protection and system reset in a variety of conditions. It is the latest in the MAXIM’s family of supervisors and is designed to enable fast response time, ultra low-power enablement, and low cost power management for a wide range of processor-based systems. The MAX800MESE+ is designed for use in desktop system, server, communication, and a variety of greenware applications.

Features of MAX800MESE+

The MAX800MESE+ offers numerous features to enable designers to ensure the reliability and performance of their processor-based systems. These features include:

• Low-power standby enablement – The MAX800MESE+ provides ultra-low-power enablement, with typical standby current of 500nA at 3.0V.
• Pre-biased enablement for boot-up failures – The MAX800MESE+ is designed to enable pre-biased enablement for systems that require periodic boot-up failures.
• Wide operating voltage range – The MAX800MESE+ is designed to operate from 1.14V to 3.63V, enabling easy adaptation for a variety of operating voltages.
• Error output propagation – The MAX800MESE+ provides error output propagation for processor reset in case of a failure.
• Output control – The MAX800MESE+ supports output control, allowing users to increase the processor reset time in response to various conditions.
• Dual trigger pin support – The MAX800MESE+ supports a dual trigger pin configuration, allowing users to adjust the reset delay time in response to various conditions.
• Fast response time – The MAX800MESE+ supports fast response time, with a reset delay time of up to 5ms.
• Open-drain and push-pull outputs – The MAX800MESE+ supports both open-drain and push-pull outputs, allowing designers to choose the most appropriate method for their systems.
• High input impedance – The MAX800MESE+ has a high input impedance, allowing for ease of integration with a variety of analog and digital systems.

Application Fields of MAX800MESE+

The MAX800MESE+ is designed for use in a variety of processor-based systems, including desktop systems, servers, communication equipment, and other greenware applications. It is especially well-suited for applications in which power consumption and reliability must be balanced, such as embedded applications, automotive systems, and edge computing. The MAX800MESE+ provides ultra-low standby power enablement, fast response time, and tolerant pre-biased conditions, allowing designers to ensure that their systems remain dependable and performant.

Working Principle of MAX800MESE+

The MAX800MESE+ is an integrated power management supervisor that provides protection and system reset in risky conditions. The MAX800MESE+ monitors the voltage levels of the system’s supply rails, and when it detects a fault, it provides a reset signal to the system’s processor. The MAX800MESE+ supports both open-drain and push-pull outputs for reset, allowing users to choose the most appropriate method for their applications.The MAX800MESE+ also provides error output propagation, allowing it to provide a reset signal to the processor in the case of a failure. In addition, it allows users to adjust the reset delay time with its dual trigger pins. This allows users to increase or decrease the reset delay time, making it easier to adapt to a variety of environmental conditions. Additionally, the MAX800MESE+ provides a wide operating voltage range of 1.14V to 3.63V, enabling it to be adapted to a variety of applications. Finally, it provides an exceptionally low-power enablement, with a typical standby current of only 500nA.

Conclusion

The MAX800MESE+ is an integrated power management supervisor designed to support a variety of processor-based systems. It provides ultra-low-power enablement, fast response time, and tolerant pre-biased conditions, allowing designers to ensure the reliability and performance of their systems. The MAX800MESE+ also provides error output propagation, and dual trigger pin support, allowing users to adjust the reset delay time based on environment conditions. Finally, it offers a wide operating voltage range, from 1.14V to 3.63V, enabling easy adaptation for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description