MAX815TCSA+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX815TCSA+ is a microprocessor supervisor IC designed to protect microprocessors and other digital components against power disruption and wrong powering situation. It is classified as a PMIC (Power Management Integrated Circuit) – Supervisors due to its ability to sense power input and monitor power supply line in order to provide a secure system for any microprocessor.

The MAX815TCSA+ was built to provide power sequencing and reset generation for going through a start-up and shut-down cycle during power or voltage changes. It contains several features to handle power sequenced tasks like supplying voltage, current, reset or interlock signals to activate the microprocessor.

It can monitor power supply voltages, on-chip temperature, system reset and operation frequencies when either external or internal power sources are in use. A watchdog timer is included to reset any frozen processor by using an active low system reset. A POR (Power-On Reset) circuit is present to ensure that the reset signal is valid during power up.

The MAX815TCSA+ application field reaches a variety of sectors including Automotive, Industrial, Computer Peripherals, Office Automation, Instrumentation, Telecommunications and Portable (battery-powered), among others.

An overall performance of the MAX815TCSA+ make it suitable in a range of system designs, even in rugged systems, due to the high protection against input overvoltage. It functions up to a wide range of operating temperature (-40°C to +125°C) and thus can be used in harsh environment. The built-in power-on reset (POR) circuit provides a reset with a precise and low reset threshold voltage of 2.20V.

The MAX815TCSA+ has an active-low reset output that should be connected to the reset input signal on the microprocessor (also known as RST signal). Whenever the power input reaches a certain voltage threshold, the MAX815TCSA+ activates the reset signal. This reset signal stays low until the power input is within an acceptable voltage range. The reset threshold voltage can be adjusted by using a resistor divider, allowing lower or higher reset thresholds depending on the application.

The power input can be monitored by using a PGOOD signal, which sends a low voltage signal (<0.5V) when the power reaches a valid voltage threshold. Once this system is acquired, the user can be sure the correct voltage is being supplied to the microprocessor and other components. The reset signal can be used to protect and shutdown the system in case the voltage becomes lower or higher than the set voltage range.

The watchdog timer is important to ensure that any frozen microprocessor is rebooted or restarted after a certain period of time. This timer is integrated in the MAX815TCSA+ and can be programmed to reset the system after a predetermined number of clock pulses. The watchdog timer can be programmed to generate a reset pulse in a range of 1ms to 255s.

The MAX815TCSA+ can be used in different type of systems, such as automotive, industrial, servers and other types of computers. To many electronic circuit designs, a supervisor IC such as the MAX815TCSA+ is essential to ensure the power supply is stable and reliable.

In conclusion, the MAX815TCSA+ is a powerful supervisor IC from the PMIC (Power Management Integrated Circuit) family. It provides reset and reset delay functions, with a reset threshold voltage that can be adjusted by using a resistor divider. The MAX815TCSA+ can monitor power input and PGOOD signals, and also contain a watchdog timer for rebooting frozen microprocessors. The wide range of applications and improved performance compared to other supervisor ICs make the MAX815TCSA+ a leading choice for many system designs.

The specific data is subject to PDF, and the above content is for reference