MAX9013EUA+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MAX9013EUA+ is an adjustable micropower comparator, which belongs to the Linear comparator family. It is primarily used for motion control applications and for interfacing analog signals with digital systems. The MAX9013EUA+ comparator integrates a variety of features such as dual input buffers, low power consumption, adjustable hysteresis, low voltage operation, and high input impedance to ensure that it meets the needs of various applications.

The MAX9013EUA+ comparator compares two input signals and can drive a digital logic output high or low depending on the state of the two inputs. The comparator\'s output is also known as an open collector output due to its open-drain transistor configuration. The comparator\'s output is then connected to a connector pin and routed to an external load.

The MAX9013EUA+ comparator features adjustable hysteresis which enables users to set the comparator\'s hysteresis based on the application\'s needs. Hysteresis helps to prevent the output of the comparator from rapidly switching states due to noise in the input signals. This can be programed using the hysteresis control pin. The hysteresis also helps to reduce power consumption by reducing the number of times the comparator needs to switch between its high and low states.

The MAX9013EUA+ comparator features low power consumption allowing it to be used in battery operated and portable applications. The comparator consumes only 1.5 mA of current which is much lower than traditional comparators. This helps reduce power consumption in battery powered applications and extends the battery life.

The MAX9013EUA+ comparator is also capable of operating in a wide range of supply voltages from 1.8 V to 5.5 V and is able to withstand noise spikes up to 7.0 V on its inputs. This wide input range and noise immunity makes it suitable for a wide range of applications from automotive to industrial.

The MAX9013EUA+ comparator\'s high input impedance makes it better than comparators with a lower input impedance. This is accomplished by using a high current fake-out resistor and active resistors in the input stage. This will minimize the loading of the signal source and result in a better response and less noise.

The MAX9013EUA+ comparator features an adjustable power-on reset delay function which allows users to configure the time it takes for the output of the comparator to reach valid logic levels after powering up the device. The adjustment pin of the device can be used to adjust the delay time from 0.50

The specific data is subject to PDF, and the above content is for reference