MAX9040BEUK+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Linear-Comparators are electronic components that enable designers to detect temperature, voltage and/or current, while they can also be used to buffer signals. The MAX9040BEUK+T is a series of Linear-Comparators that provides an absolute maximum rating of 32V and contains a slew rate of 3V/us, offering reliable operation when compared with competing devices.

Specifically, the MAX9040BEUK+T, with its 11-bit resolution, is an integrated, low-power voltage comparator, featuring an internal voltage reference. It\'s able to compare two output voltages against one another, driving an output logic-level signal with a gain of 17dB. Its primary application is to monitor or compare voltage, current, temperature/humidity and asymmetry from a base reference.

This specific linear-comparator also provides a rail-to-rail input and a quoted turn-on delay time of 500ns. This enables designers to perform quickly the input conversion, sending a signal promptly and reliably through to the output. Additionally, it features a wide supply-voltage range, making it suitable for a variety of applications.

In terms of how this comparator works, it\'s designed with internal Hysteresis to switch the output voltage level depending on the input signal. The Hysteresis can be set by a single external Resistor. In terms of the comparator\'s \'state\', it will switch to its logic high level when its input voltage isn\'t less than the voltage reference plus L Hysteresis (Vref + LH). Additionally, it will switch to its logic low level when the input voltage is less than the voltage reference minus Hysteresis (Vref - LH).

The MAX9040BEUK+T allows for adjustments to the output to handle scaling, offsetting and limiting control, allowing for better fine-tuning and greater flexibility for designers. When it comes to assessing the output from the MAX9040BEUK+T, this linear-comparator also includes a totem-pole-type output, allowing for easy connection with a host device.

In terms of application, this linear-comparator is ideal for use in a variety of areas including battery-powered electronic systems. It is also suited to tasks such as window comparator and analogue switches, which is the comparison between two sections of a voltage and the switching of the output accordingly, and is therefore ideal as a precision integrated circuit temperature sensor, helping to provide accurate readings of the ambient temperature.

In short, the MAX9040BEUK+T series of linear-comparator provides low-power consumption and internal Hysteresis for quickly and conveniently converting input signals to output voltage. It is ideal for powering battery-powered electronic systems and for tasks such as window comparator and analogue switches, helping to save time and cost on multiple tasks.

The specific data is subject to PDF, and the above content is for reference