MAX9108EUD

Current - Output (Typ):	--
Base Part Number:	MAX9108
Supplier Device Package:	14-TSSOP
Mounting Type:	Surface Mount
Package / Case:	14-TSSOP (0.173", 4.40mm Width)
Operating Temperature:	-40°C ~ 85°C
Hysteresis:	2mV
Propagation Delay (Max):	25ns
CMRR, PSRR (Typ):	86.02dB CMRR, 86.02dB PSRR
Current - Quiescent (Max):	700µA
Series:	--
Current - Input Bias (Max):	0.125µA @ 5V
Voltage - Input Offset (Max):	1.6mV @ 5V
Voltage - Supply, Single/Dual (±):	4.5 V ~ 5.5 V
Output Type:	TTL
Number of Elements:	4
Type:	General Purpose
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX9108EUD is a comparator from the Linear Comparators family. It is a precision, low power, and single-supply comparator that incorporates signaling output, supply voltage supervisor, and input voltage limit protection features. The application field and working principle of the MAX9108EUD is outlined in this article.The MAX9108EUD is designed specifically for low voltage applications ranging from 1.8V to 5.5V on its supply voltage. It is housed in a small SOT23-6 package, which makes it suitable for space constrained applications. The MAX9108EUD can operate in thresholds from 1.0V to 5.5V, making it ideal for monitoring micro-power supply voltages.The MAX9108EUD has a wide range of uses. It can be used in industrial instrumentation and data acquisition systems, fax/modem circuits, external modems, cable cards and controllers, set-top-boxes, biometric sensors, and automotive systems. The comparator can be used to detect over-voltage or over-temperature conditions, as well as to perform fault detection.The MAX9108EUD is a hysteretic comparator with a single open-drain output. The comparator\'s output voltage is typically 0.3 to 0.4V when it is low, and VDDA to 0.4V when it is high. The comparator can be used to monitor a threshold voltage from an external supply and provide a logic signal when the threshold voltage is exceeded. The hysteresis voltage of the comparator can be adjusted using the external resistor connected to the TH pin. The TH pin is also used to adjust the threshold voltage. The comparator also has input protection and a supply voltage supervisor that provides two power-on reset (POR) thresholds. The first POR threshold is set at 1.5V and the second POR threshold is set at 1.4V for ultra-low power applications. This provides input protection from extreme voltage levels that could damage the connected devices. The MAX9108EUD also features a low current comparator with a typical supply current of 3.5µA. It also features an adjustable switching threshold from 1V to 5.5V with a typical Hysteresis voltage of 400mV maximum. This provides excellent accuracy and performance.The MAX9108EUD is a low power comparator that is an ideal solution for low voltage applications. It provides excellent performance in a small package with a hysteretic comparator, two POR thresholds, and adjustable hysteresis voltage. The wide range of applications that this comparator can be used for make it a highly practical solution for many applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description