MAX9110EKA+T Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX9110EKA+T is a product from Maxim Integrated and is a single chip dual-channel RS-232 transceiver. It is designed to provide an interface between the two-wire full-duplex communications bus and RS-232-compatible serial ports and UARTs, while using ultra-low power consumption. The MAX9110EKA+T can provide a wide range of operations, including line and system level communications, as well as error detection, wake-up sources and line discipline. It has an operational frequency range of up to 3.68MHz and an operating temperature range of -40 to 85°C.

The MAX9110EKA+T is suitable for a variety of applications, such as serial communication, data acquisition, RFID, security systems and industrial automation. It has a quiescent current of 10μA in the standby mode and a transmit current of 10μA in the active mode. This low power consumption allows the device to be used in battery-powered applications. It also features a wide range of communication interface features, including an adjustable wake-up source, advanced error detection and auto-made wake-up response. It also features a low-noise antenna driver, which can reduce RF interference on the communication line.

The working principle of the MAX9110EKA+T is based on its dual-channel system. The device consists of two parts; the transmitter channel and the receiver channel. The transmitter channel contains a transmit enable control, low-noise amplifier, two flip-flop inverters, two comparators, a power fail indicator and a driver stage. The transmitter channel is used to interface the two-wire half duplex communications bus to the RS-232 compatible serial ports and UARTs. The transmit enable control is used to enable/disable the transmitter circuit. The low noise amplifier amplifies the signal to reduce noise and increase output level. The two flip-flop inverters are used to invert the binary data from the source. The two comparators combine the inverted signals and output a differential signal.

The receiver channel contains a receive enable control, low-noise amplifier, two comparators and a power fail indicator. The receive enable control is used to enable/disable the receiver circuit. The low-noise amplifier amplifies the signal to reduce the noise. The two comparators are used to differentiate the binary data from the source. The power fail indicator indicates power failure. The receiver channel is used to interface the two-wire half-duplex communications bus to the RS-232 compatible serial ports and UARTs.

The MAX9110EKA+T is an ideal device for applications that require low power consumption, low noise, and an adjustable wake-up source. It is also suitable for applications where a high level of error detection and auto wake-up response is required. This device provides for a reliable interface between the two-wire full-duplex communications bus and RS-232-compatible serial ports and UARTs, making it an effective solution for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference