MAX9125ESE+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX9125ESE+T is a single, 12-bit driver/receiver that meets or exceeds the requirements of the LVDS standard. It is designed to provide an economical solution for point-to-point or multi-drop, low voltage differential signaling. The device has separate outputs for both the transmitter and receiver sections, allowing for a wide variety of applications and operating frequencies.

The application field of MAX9125ESE+T includes industrial automation, communications, consumer electronics, medical imaging, and other applications that require high speed data transmission with high signal integrity.

The working principle of MAX9125ESE+T is based on the high-speed transmission of a signal from one device to another via a differential transmission line. In order to increase the signal-to-noise ratio, the signal is sent from the driver in differential form, meaning it consists of two complementary but non-contradictary voltage levels. The signal is then transmitted via the transmitter’s differential impedance matched wires to the receiver. The receiver, which is basically an amplifier, amplifies the signal and reconstructs it, thereby retrieving the original signal.

The device’s transmit section is built up of a programmable DC-DC converter, a low-noise, high-slew rate driver, and an adjustable transmitter switch. The adjustable transmitter switch allows the device to be calibrated to match the transmission line characteristics. The receiver section includes a low noise amplifier with feedback loop, a low jitter phase-locked loop (PLL) clock multiplier and a differential receiver.

In addition, the device has an integrated loop control circuit which allows the transceiver to adjust the virtual ground at the transmitter and receiver to reduce the effect of ground bounce. The loop control also reduces crosstalk and jitter by adjusting the receivers gain to match the line impedance.

The MAX9125ESE+T offers a wide range of features for data transmission over long distances. It is designed to operate over transmission lines up to 40m in length, ensuring that high speed data transmission is possible over long or short distances. The device is also capable of transmitting data on a single differential wire pair over a range of frequencies up to 400MHz.

The MAX9125ESE+T also offers a variety of protection and diagnostic features. It has integrated ESD protection that meets or exceeds the requirements of IEC-61000-4-2 level 4. It also includes CRC error detection and a power down detection feature which detect faults on the transmission line. The device also has two GPIO pins which can be used to detect faults in the transmission line, power supply, and other external components.

The MAX9125ESE+T is an ideal solution for applications requiring high speed data transmission with high signal integrity. Its wide range of features and protection make it an ideal choice for industrial automation, communications, consumer electronics, medical imaging, and other applications.

The specific data is subject to PDF, and the above content is for reference