MAX9985ETX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF mixers offer a variety of uses to engineers, ranging from transferring signals from one frequency to multiple frequencies, to providing required amplification for systems and receivers. The MAX9985ETX is a frequency conversion mixer IC that comes with built-in low noise and high linearity performance. This IC is specifically designed for downconversion mixing applications and ideal for use in RF-to-baseband signal conversion for both transmitters and receivers. In this article, we will look into the application fields and working principle of the MAX9985ETX mixer IC.

The major application of the MAX9985ETX is its use in RF transceiver systems. This IC is equipped with two direct conversion radio transceivers (DCXRs), four balanced LNA inputs, four digitally programmable synthesizers, and four outputs for 2.5 GHz and 4.25 GHz receivers. Additionally, the MAX9985ETX comes with two voltage-controlled oscillators (VCOs) and a dual-channel direct conversion radio (DCXR) system with each input terminator fitting perfectly with its output. This feature makes the MAX9985ETX suitable for single- and multiple-channel receiver applications.

Furthermore, the MAX9985ETX is suitable for use in system communication networks, allowing signals to be transferred to low power points. It also features a programmable phase-locked loop (PLL) that has highly stable performance and can be used to lock the RF signal transmitted and received to a low-noise synthesizer. This low-noise synthesizer can be used to filter out the noise in the communication network and allows for much cleaner signal transmission.

The MAX9985ETX provides several other applications since it can be used for frequency up-conversion, as the dc bias voltage for the LNA and VCO inputs can be varied to perform frequency up-conversion. A combination of the IC\'s low noise performance with the up-conversion function makes it suitable for low-power, long-range transceiver applications. Additionally, the IC can be used to provide the necessary gain and linearity for radar systems, pulse width modulation, and FM radio.

Now that we have discussed the main application fields of the MAX9985ETX mixer IC, let us look at its working principle. Upon receiving a signal, the IC is equipped with an automatic gain control (AGC) loop that reacts to the signal power such that the total gain maintains a set value. This set value is then used to determine the current level of the signal and adjusts the gain accordingly. The AGC is also used to control the level of any additional noise in the signal.

The IC is also equipped with a PI (proportional–integral) controller. This controller works on the principle of measuring the input signal and comparing it with a desired setpoint. Based on this comparison, the PI controller works to adjust the output of the mixer in order to minimize the error between the two signals. The PI controller also works alongside the AGC to help reduce any additional noise in the signal.

In conclusion, the MAX9985ETX mixer IC provides an ideal solution for RF-to-baseband signal conversion applications, offering low-noise performance and high linearity. It is suitable for use in multiple applications, including transceivers, RF signal up-conversion, communication networks, pulse width modulation, and FM radio. The IC also features an integrated direct conversion radio (DCXR) transceiver with two VCOs and a highly stable PI (proportional–integral) controller. All of these factors combine to make the MAX9985ETX an ideal IC for frequency conversion mixer applications.

The specific data is subject to PDF, and the above content is for reference