MB358W-BP

Series:	--
Packaging:	Bulk
Part Status:	Obsolete
Diode Type:	Single Phase
Technology:	Standard
Voltage - Peak Reverse (Max):	800V
Current - Average Rectified (Io):	35A
Voltage - Forward (Vf) (Max) @ If:	1.2V @ 17.5A
Current - Reverse Leakage @ Vr:	10µA @ 800V
Operating Temperature:	-55°C ~ 150°C (TJ)
Mounting Type:	Through Hole
Package / Case:	4-Square, MB-35W
Supplier Device Package:	MB-35W

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

.

Diodes - Bridge Rectifiers

A bridge rectifier is an electronic component that converts alternating current (AC) to direct current (DC). The MB358W-BP is a single phase bridge rectifier widely used in AC/DC power supply designs.

Components

The MB358W-BP bridge rectifier is composed of four individual rectifying diodes. The four diodes used economically form a single component that performs the AC to DC conversion. The diodes are typically packaged in a standard axial form for use in circuit boards. The maximum forward current per diode is 3.0A and the maximum reverse voltage is 800V.

Operation

Bridge rectification utilizes the characteristics of diodes to convert alternating current to direct current. A bridge rectifier works by using two opposing diodes connected in series with the AC voltage source. This circuit is then completed by two remaining diodes connected in series with the AC voltage source but in the opposite direction.During the positive half cycle of the input AC waveform, current can only flow through the two ‘forward’ diodes towards the load. This ‘positive’ half cycle is inverted by the two ‘reverse’ diodes, creating a bridge of diodes that allows DC current to flow in a single direction. During the negative half cycle, the direction of current flow is reversed, allowing the current to flow in the same direction as it did during the positive half cycle. As a result, all AC waveform is converted to DC waveform at the output.

Benefits and Application Field

The MB358W-BP is an ideal component for power supply designs because it is greatly reliable and uses a simple configuration of four diodes to convert alternating current to direct current. This component is often used in power supplies, automotive electrical systems, served as charging circuit and rectification circuits.The MB358W-BP bridge rectifier is also relatively low cost and small in size, which makes it easier to use in consumer and industrial applications. Also, it has a high surge current and withstands higher temperatures, making it ideal for power systems with a large peak current draw.Finally, the MB358W-BP bridge rectifier is ideal for applications where the power supply must perform at a high efficiency level and provide optimized AC/DC conversion. It is also ideal for use in medical devices, motor control systems, and other high-frequency or high-load applications.

Conclusion

The MB358W-BP bridge rectifier is a very capable component for AC/DC power supply designs. Its components are reliable and economical, and its small size and low cost make it suitable for use in consumer and industrial applications. Additionally, it can handle high surge current ratings and low temperatures due to its robust design, making it a great choice for systems that require high efficiency and optimized AC/DC conversion.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description