MB4M-E3/45

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are semiconductor devices that allow an electrical current to flow in one direction while blocking the flow of current in the opposite direction. Bridge rectifiers are diodes that are typically connected in a “bridge” configuration and are used to convert an alternating current (AC) to a direct current (DC). The MB4M-E3/45 bridge rectifier is a four-phase bridge rectifier used in a wide variety of applications, including power rectification, motor control, and power conditioning.

The MB4M-E3/45 is an isolated phase, four-phase bridge rectifier with an isolation distance of 1.5 inches (38.1 mm). It is constructed with an electrically insulated base and aluminum housing to provide protection from electrical shock, vibration, and interference. The rectifier is rated for use in AC power systems up to 250 volts and 30 amps, and is rated for up to 200 amps at up to 60 hertz. It has an operating temperature range of -40°C to 85°C and a peak inverse voltage of 200 volts.

The MB4M-E3/45 is designed to provide a reliable, efficient, and cost-effective way to convert AC power to DC power. The device consists of four rectifiers connected in a diamond-shaped pattern, with the two sides of each rectifier internally bridged. The bridge rectifier is designed to provide clean DC power while eliminating power fluctuations, line transients, harmonic distortion, and radio frequency interference.

The working principle of the MB4M-E3/45 bridge rectifier is simple and effective. When an AC voltage is applied to the device, the alternating current is converted to direct current by the diodes. Depending on the phase of the AC input voltage, one or more of the diodes will turn off and on as the polarity of the AC voltage changes, allowing the current to flow in one direction and allowing the rectification of the AC voltage.

The MB4M-E3/45 bridge rectifier is used in a variety applications, including motor control, power conditioning, power rectification, and other power conversion applications. In motor control applications, the rectifier is used to convert AC power to DC power to control the motor speed and power delivery. In power conditioning applications, the rectifier is used to convert AC power to clean DC power, eliminating power fluctuations, line transients, harmonic distortion, and radio frequency interference. In power rectification applications, the rectifier is used to convert AC power to DC power in order to reduce rectification power loss.

The MB4M-E3/45 is a cost-effective, reliable, and efficient four-phase bridge rectifier that is used in a variety of applications, including motor control, power conditioning, and power rectification. The device is designed to provide clean DC power while eliminating power fluctuations, line transients, harmonic distortion, and radio frequency interference. It is constructed with an electrically insulated base and aluminum housing to provide protection from electrical shock, vibration, and interference, and is rated for use in AC power systems up to 250 volts and 30 amps.

The specific data is subject to PDF, and the above content is for reference