MB81-BP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Bridge Rectifiers are widely used in electronics for many applications. The most common of these applications is the MB81-BP. The MB81-BP is a bridge rectifier diode designed to rectify AC into DC.

The MB81-BP rectifier is composed of two PNP and two NPN transistors connected in a bridge configuration. The PNP transistors are in parallel with the NPN transistors. This allows the rectifier to convert alternating current into direct current. The rectified current is then used in various applications such as power supplies, motor controls and communications circuits.

The MB81-BP bridge rectifier has a high voltage rating of 80V for both the anode and cathode. This rating makes it suitable for a variety of applications, including motor control, power supplies and communications circuits. In some applications, the rectifier can be used to convert AC voltage into a lower level DC voltage, as well as converting higher level AC voltage into a lower level DC voltage.

The MB81-BP rectifier is also designed to operate in a wide range of temperatures. The wide operating temperature range ensures that the device can handle extreme environmental conditions, such as extreme heat or cold. This makes it suitable for applications in areas with extreme climates.

The MB81-BP bridge rectifier also has a very low forward voltage drop. The forward voltage drop is the difference between the voltage at the anode and the voltage at the cathode. This low forward voltage drop makes the MB81-BP an ideal choice for power supplies and motor control systems. The low forward voltage drop also helps conserve energy by ensuring that the required voltage is supplied to the load with minimal losses.

In terms of working principle, the MB81-BP bridge rectifier uses a pair of PNP and NPN transistors to create a bridge circuit. The alternating current flows through the bridge circuit, and the two transistors direct the current to either the anode or cathode. The current then passes through the rectifier and is converted into direct current.

Finally, the MB81-BP bridge rectifier is also designed with several safety features. These features include an over-current protection device and an anti-surge device. The over-current protection device prevents damage to the rectifier due to an excessive current flowing through it. The anti-surge device helps prevent damage to the rectifier due to sudden changes in the input voltage.

The specific data is subject to PDF, and the above content is for reference