MBB02070C1303FC100 Resistors

Series:	MBB/SMA 0207 - Professional
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	130 kOhms
Tolerance:	±1%
Power (Watts):	0.6W
Composition:	Thin Film
Features:	Automotive AEC-Q200
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	--
Size / Dimension:	0.098" Dia x 0.256" L (2.50mm x 6.50mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Through Hole Resistors, such as MBB02070C1303FC100, are passive electrical components used in a vast majority of electronic circuits. Resistor’s main purpose is to limit the current flow, regulate the voltage levels in the circuits, provide bias to the active components like transistors and filter the signals. Through Hole Resistors are available in both cylindrical and rectangular shaped packages, however MBB02070C1303FC100 takes the cylindrical shape of package with insulated surfaces and flexible leads on both ends.

Application Field

MBB02070C1303FC100 finds its application in many different areas. Most common application of this resistor is in the DC and AC stabilized power supply circuits. As you know, the power supplies need to be regulated to provide a standard output voltage. Through Hole Resistors can be used to reduce the AC fluctuation levels to a desired level. Also, this resistor can be used to protect devices from power surge. Power surge can cause permanent damage to electronic components like capacitors and transistors. To protect these components, Through Hole Resistors can be used to limit the surge.Furthermore, Through Hole Resistors are very commonly used in voltage regulation of high powered circuits. These resistors are used to regulate the voltage levels to required MAX voltage levels which are suitable for components and internals of the circuit. They are also used to regulate the current levels in the circuit, to avoid any over current situations.

Working Principle

In simple terms, the working principle of a Through Hole Resistor is ohmic resistance. This type of resistor has a certain resistance value marked at the body of the component which is represented in either Ohms or Kilo ohms (KΩ). This value signifies the exact level of resistance that can be developed in the circuit based on the required current.The working of Through Hole Resistors can be explained as follows. When a voltage is applied to the resistor, electrons try to pass through the resistor and reach the resistor terminals. But these electrons are subjected to a certain force which is known as resistance. This resistance dissipates electrical energy in the form of heat energy which can lead to the damage of internal components of the circuit. By increasing or decreasing the resistance, the total voltage and current can be regulated.

Conclusion

To conclude, MBB02070C1303FC100 is a Through Hole Resistor which is extensively used in a variety of application fields. This resistor mainly works based on the ohmic resistance principle and is used to regulate the voltage levels, current levels and protect the circuit from power surge.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description