MBB02070C3321DRP00

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are electrical components used in electronic circuits to limit current, divide voltages and adjust signal levels. They can also prevent undesired currents. A Through Hole Resistor, or THT Resistor, is a fixed-value resistive component with two electrical connections. They come in a variety of shapes and sizes and are usually made from ceramic, carbon, metal film or metal oxide.

The MBB02070C3321DRP00 is a Through Hole Resistor designed by Panjit and manufactured by TDK. It is a type of thick film resistor with a maximum power rating of 1/4 watt. The resistor has a J-bend termination on the sides, making it suitable for use in both surface-mount and through-hole applications. Its size is 0.09±0.015mm x 0.6±0.1mm, which makes it suitable for mounting on small and low-profile circuit boards. With a tolerance of +/-1% and temperature coefficient of 10ppm/°C, the MBB02070C3321DRP00 is ideal for low-noise and high-precision operations.

The MBB02070C3321DRP00 has a wide range of applications, including telecommunications, consumer electronics, medical, automotive, audio, and more. It is also widely used in high-frequency circuit boards, including Bluetooth, WiFi, and data communication modules. The presence of the J-bend makes it an ideal choice for use in automatic assembly, providing higher efficiency and accuracy. Moreover, the MBB02070C3321DRP00 is RoHS compliant.

Working Principle

The working principle of the MBB02070C3321DRP00 is simple; it consists of a thick film composition of fine ceramic particles applied to an alumina substrate. This composition is screen-printed onto the alumina substrate and fired in order to create a solid circuit board pattern. As electricity passes through the resistor, the ceramic composition acts as an insulator, slowing down its progress in order to limit its current to the desired level.

The resistance tolerance of the MBB02070C3321DRP00 is determined by the application of metallization during the manufacturing process. During this process, a continuous carbon film is applied to the substrate and electrically connected to the connector. This creates a variable resistance between its two points. The resistance can then be accurately controlled for various applications.

The MBB02070C3321DRP00 has a few advantages. It is often used in applications that require highly accurate and stable resistance values over wide temperature ranges. It also has high insulation resistance and is resistant to both shock and vibration, which make it a viable choice for a variety of demanding applications. Last but not least, the MBB02070C3321DRP00 is relatively inexpensive, making it a cost-effective alternative to other types of resistors.

In conclusion, the MBB02070C3321DRP00 is a Through Hole Resistor designed to meet a variety of needs. It offers a high power rating, high resistance values, and excellent stability in a wide variety of conditions. With its J-bend termination, the MBB02070C3321DRP00 is suitable for both surface-mount and through-hole applications. And with its excellent properties and cost-effectiveness, the MBB02070C3321DRP00 is ideal for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference