MBB02070C1421DC100

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

A resistor is a two terminal electrical component through hole resistors are those designed to be directly mounted into printed circuit boards. The MBB02070C1421DC100 is a particularly common resistor used in contemporary circuit boards, primarily due to its low power dissipation and cost effective design. It is primarily designed to measure resistance in a wide range of applications.

Applications

The MBB02070C1421DC100 through hole resistor has a wide range of applications, including its use in high-end consumer electronics, telecommunications, aerospace components, and automotive components. It is designed to resist increased levels of temperature and voltage, making it suitable for use in these high-stress environments. Additionally, the through hole resistor is also designed to measure the current in and out of the circuit, ensuring accurate detection and measurement of the current. This level of accuracy makes it particularly well suited for scientific and engineering applications.

Working Principle

The MBB02070C1421DC100 through hole resistor works on a simple principle, which involves the resistance of current between two points. The resistor is a passive component, meaning it does not require any external power in order to operate. It works by working on a modified Ohm’s law), to measure the resistance between two points against a known current. This resistance is then used to indicate the current in the circuit.

The resistor works by dissipating a portion of the voltage in the circuit, in order to bring the voltage of the circuit down to a safe level. By dissipating the voltage, the resistor works to protect the other components in the circuit from damage due to overcurrents or excessive voltage. As well as this, the resistor also works to ensure that the current level in the circuit is maintained at a safe and consistent level.

Typical Specifications

The MBB02070C1421DC100 through hole resistor works as a power resistor in circuits with 5 watts of power or less. It is typically rated at 14.2k Ohms, with a 0.1 watt (100 mW) of dissipation, and a 1% tolerance. The contact resistance of the resistor is typically between 0.1Ω and 0.2Ω. It is available in a variety of packages, including 3, 4 and 5-pin through hole, and SMT surface mount packages.

The resistor also typically has a temperature coefficient of ±20 ppm/°C to -40°C to +125°C, with a maximum voltage rating of 200V. Additionally, the resistor can also handle a maximum peak pulse voltage up to 300V. Its operating temperature ranges between -65°C and +150°C, with an insulation resistance of 1000 MΩ.

Advantages

The MBB02070C1421DC100 is a cost effective and reliable solution for circuit board applications. The resistor is designed to dissipate low amounts of energy, while maintaining an accurate and consistent current measurement. Its thick film construction also ensures that it is able to handle higher temperatures and more voltage levels then other resistors of the same size. This makes the MBB02070C1421DC100 a perfect choice for industrial and consumer electronics applications.

The MBB02070C1421DC100 through hole resistor is a reliable and cost effective component for use in a variety of applications. Its ability to accurately and consistently measure and dissipate current, while providing a level of protection from overcurrents and excess voltage, makes the MBB02070C1421DC100 a highly desirable choice for circuit board assemblers.

The specific data is subject to PDF, and the above content is for reference