MBB02070C2400FC100

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors are components that are used in electric circuits to restrict the flow of current. The most common type of resistance used for this purpose is the MBB02070C2400FC100. This resistor is incredibly versatile and can be safely used in a variety of applications.

The MBB02070C2400FC100 is a three terminal resistor with two solder pads at the ends and an insulated center wire. It is also a comparatively small component, measuring only 0.2 inches in length and 0.008 inches in diameter. Despite its small size, this resistor is able to provide an impressive amount of resistance with a value of 27 ohms.

One of the most common applications of the MBB02070C2400FC100 is as a voltage divider. Voltage dividers are circuits that split a voltage source into two components, with each component receiving a different voltage. This voltage is determined by the ratio of the resistors in the circuit. As the resistance of one resistor increases, the other resistor will decrease proportionally. As a result, the MBB02070C2400FC100 can be used to precisely divide a voltage without wasting excess power or compromising accuracy.

The MBB02070C2400FC100 can also be used as a current limiting resistor. This application is accomplished by connecting the resistor in series with an LED. The resistor will restrict the flow of current through the LED, thus limiting the amount of power the LED consumes. This is an essential part of many LED circuits, and can help to extend the life of the LED and protect other components in the circuit.

Finally, the MBB02070C2400FC100 can also be used as a driver resistor in a switching circuit. A driver resistor is essentially a small resistor that restricts the current between a transistor switch and its load. This helps to keep the transistor switch in a static state until it is required to switch on or off. It also reduces the amount of current that can be drawn by the load, which reduces the risk of injury or damage.

In conclusion, the MBB02070C2400FC100 through hole resistor is an incredibly versatile component with multiple applications. It can be used as a voltage divider, a current limiting resistor, and a driver resistor in multiple switching circuits. This small, powerful resistor is a fantastic choice for any application that requires reliable and accurate resistance.

The specific data is subject to PDF, and the above content is for reference