MBB02070C5118FC100

Series:	MBB/SMA 0207 - Professional
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	5.11 Ohms
Tolerance:	±1%
Power (Watts):	0.6W
Composition:	Thin Film
Features:	--
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	--
Size / Dimension:	0.098" Dia x 0.256" L (2.50mm x 6.50mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors: MBB02070C5118FC100 application field and working principle

Through hole resistors are a type of resistor that is designed to be inserted through a hole in a printed circuit board (PCB). They are also referred to as through-hole components, because they are placed directly into the PCB\'s holes. Through hole resistors are available in a wide range of sizes, shapes, and ratings. They can be constructed of metal films, wire, or ceramics, with ratings ranging from 0.25 watts to over 1,000 watts.One such example is the MBB02070C5118FC100 resistor, a through-hole resistor that can handle up to 30 watts. It has a voltage limit of 500 volts-DC and a tolerance of +/-2%. This resistor is typically used in high-power applications such as welding, motor drives, and power amplifiers. It is also suitable for applications where a low-inductance, high current, and low voltage drop are necessary.The working principle behind this type of resistor is based upon the resistance of the material it is made from, which is determined by its surface area and length. The resistance of the resistor depends on the materials of the resistive element, such as metal films, wire, and ceramics. When a current passes through the resistor, the materials that make up the element resist the flow of electricity, and energy is dissipated as heat. The amount of resistive power that is dissipated increases in proportion to the current; for example, if the current doubles, the energy dissipated doubles.The resistive element of the MBB02070C5118FC100 resistor is composed of nickel-chrome (NiCr) wire. The NiCr wire has a resistance ranging from 7.5 to 8.4 ohms per foot, and is vacuum sealed in a glass-to-metal package for protection against environmental factors, as well as providing an increased mechanical strength. The physical size of the resistor is 0.070 inches in diameter, and it is able to handle up to 30 watts without overheating.In addition to its standard rating, the MBB02070C5118FC100 resistor is also available in an extended range, which is rated from 16 to 40 watts. This type of resistor is highly reliable and is ideal for applications that require high accuracy. As with any other type of resistor, the ambient temperature, humidity, and voltage must also be taken into account when specifying, as these factors can affect the resistors\' performance.The advantages of using the MBB02070C5118FC100 resistor in applications such as motor drives, welding, and power amplifiers are numerous. The high current and low voltage drop make this resistor ideal for high-power applications, and its small size and low inductance make it suitable for tight spaces. In addition, the resistor is extremely reliable and accurate, and the NiCr wire allows greater current ratings with lower resistances than standard resistors.In conclusion, the MBB02070C5118FC100 resistor is a versatile, high-power through-hole resistor suitable for a wide variety of applications. Its high current rating and low voltage drop make it ideal for high-power applications, and its small size and low inductance make it suitable for tight spaces. The NiCr wire allows the resistor to have an increased current rating with lower resistances than standard resistors, and its high reliability, accuracy, and extended range make it a reliable choice for any project.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description