MBB02070C6343FCT00

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through-hole resistors, or axial resistors, are resistors with two lead wires which are sealed in the resistor body, allowing them to be connected directly to a printed circuit board. The MBB02070C6343FCT00 is a through-hole resistor used specifically for power and circuit protection applications.

This resistor is intended for use in high-medium power electronic equipment. It has a power rating of 20Watts, a resistance range of 0.7-6.3 KOhms and has an operating temperature range of -55 to +155 degrees Celsius. It is made of a ceramic coated aluminum housing and high temperature steel leads, which are Easy to solder and produce resistance to soldering heat.

The MBB02070C6343FCT00 works by limiting the amount of current in a circuit to prevent overload. This is done by creating a voltage drop across the resistor. The voltage drop is dependent on the current passing through the resistor, and is inversely proportional to the resistance of the resistor. As the resistance of the resistor decreases, the voltage drop across it increases, which allows more current to pass through the circuit.

This resistor is a common choice for many applications due to its reliability, low cost, and wide temperature range. It can be used in a variety of power and circuit protection applications, such as overvoltage protection, inrush current limiting, brown-out protection, and hot-swap protection. It can also be used to reduce the power of an electrical device, or as a fuse in a circuit.

The MBB02070C6343FCT00 is a popular through-hole resistor due to its wide range of applications and its ability to handle high levels of power. Its ability to dissipate power safely and efficiently makes it a great choice for power and circuit protection.

The specific data is subject to PDF, and the above content is for reference