MBB02070D6808DC100

Series:	MBB/SMA 0207 - Professional
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	6.8 Ohms
Tolerance:	±0.5%
Power (Watts):	0.6W
Composition:	Thin Film
Features:	--
Temperature Coefficient:	±25ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	--
Size / Dimension:	0.098" Dia x 0.256" L (2.50mm x 6.50mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors, also known as leaded resistors, are electrical resistors that are mounted on the circuit board using leads, rather than solder lugs. This fastens them securely to the machine, and also allows for easy replacement. The MBB02070D6808DC100 is a through hole resistor that can be used in a variety of applications.

MBB02070D6808DC100 Application Field

The MBB02070D6808DC100 is an integrated through hole resistor that can be used in applications such as motor controllers, power amplifiers, and amplifier circuits. It is commonly used in industrial and medical applications, such as in medical imaging equipment and environmental monitors. Additionally, it can be used in a variety of consumer electronics, such as televisions, stereos, and digital cameras.

MBB02070D6808DC100 Working Principle

The MBB02070D6808DC100 is an integrated through hole resistor with a resistance value of 852 ohms and a maximum power rating of 1/4 Watts. It is a four-pin device with two outer pins that terminate the leads, and two central pins that are connected to the resistor element in series. The resistance is determined by the device’s geometry, with a typically low tolerance rating. The resistance is not affected by temperature variations or spikes, and because of its long-term stability, it can be used as a voltage divider in many applications, such as voltage regulation and control circuits. It is also used in frequency control, as the resistance varies with frequency, and is therefore useful in oscillators and filters. In addition, the MBB02070D6808DC100 can be used for signal conditioning circuits, such as level shifting and signal isolation. This is due to its ability to act as an amplifier or buffer, depending on the application. As an amplifier, it buffers signals and maintains a constant output signal level.

Conclusion

The MBB02070D6808DC100 through hole resistor is a four-pin device that has a resistance value of 852 ohms and a maximum power rating of 1/4 Watts. It is used in a variety of motor controllers, power amplifiers, amplifier circuits, medical imaging equipment, environmental monitors, and consumer electronics. Additionally, it can be used as a voltage divider, frequency control, or signal conditioner, depending on the application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description