MBB0207CC4421FC100

Series:	MBB/SMA 0207 - VG06
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	4.42 kOhms
Tolerance:	±1%
Power (Watts):	0.6W
Composition:	Metal Film
Features:	--
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	--
Size / Dimension:	0.098" Dia x 0.256" L (2.50mm x 6.50mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors: MBB0207CC4421FC100

Through hole resistors, or axial resistors, are employed in a wide variety of applications ranging from low-level analog and digital circuits to high power switches and power supplies. Through hole resistors are a form of electrical component consisting of two passive elements attached together by a lead of metal (typically aluminum or copper). These elements, made of materials such as ceramics or alloys, resist the flow of electrical current when present within a circuit. By using the resistor’s inherent properties, engineers are able to alter the electrical current’s level depending on the particular application.The MBB0207CC4421FC100 through hole resistor is a two-terminal type resistor typical of the through hole resistor technology. This resistor is constructed using silicon nitride film, a temperature-stable ceramic, which gives the device a temperature coefficient of 0.04%. Designed to operate in a wide temperature range, from -55°C to +150°C, these resistors are also compatible with RoHS and other environmental regulations. With a TCR (temperature coefficient of resistance) of -0200PPM/°C, the change in value of this resistor in context to other resistors is minimized, providing engineers and other professionals with a reliable and accurate device within their systems.Additionally, this device is rated at 100mW; in other words, a maximum of 100 milliwatts of power is available for the resistor to dissipate during operation. This allows for more resistance to be used within the circuit without the need for a large heat sink to dissipate the associated heat. In addition, the design also provides a decoupling effect, a filtering ability for the circuit. Decoupling works by allowing some of the applied voltage to be stored in the component, allowing compensations for any unexpected variations in the circuit.The MBB0207CC4421FC100 through hole resistor is a two terminal component, consisting of two metal fasteners and an internal resistor element. The conventional use of the MBB0207CC4421FC100 is in electrical control and power circuits and is used to control and regulate current levels. Depending on the application, the resistor may also act as a filter to remove noise within the system. In addition, this resistor is often used within digital circuits for impedance matching, as digital circuits are prone to interference, as seen by the requirement of encasing all microcontrollers in a metallic box to reduce noise.In conclusion, the MBB0207CC4421FC100 through hole resistor is an ideal device for use within circuit engineering. Its design allows for accurate and reliable performance, even in extreme environments, and its ability to provide decoupling and dampening allows for the device to be used in a variety of high power applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description