MBCM270F338M235A00

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters, also known as DC-DC power supplies or voltage regulators, are necessary for many electrical and electronic systems. They are crucial for safely and efficiently converting DC power from one voltage level to another, while minimizing losses and providing a more stable output voltage than the input.

MBCM270F338M235A00 is a signal conditioning bus DC-DC converter with a wide input voltage range of 4.5V to 40V and a regulated output voltage range of 0.75V to 8.0V. It is a non-isolated, synchronous, dual-channel, buck-boost power converter with a very low noise output. It has two integrated high-side N-channel MOSFETs designed for high-current applicatons.

The primary application of the MBCM270F338M235A00 DC-DC converter is in load sharing, current and position sensing, as well as in motor control. It can work with strong loads and 1-4 series of nickel cadmium batteries in wide range of motor driving applications.

When it comes to the working principle of the MBCM270F338M235A00 DC-DC converter, it is based on synchronous buck-boost topology combined with a dynamic current sharing technique. This technique enables the converter to share the current between two paths, hence, reduces the ripple generated from power loads and builds up the power delivery capability. This job is done by the two N-MOSFETs. The two low-side switches in the power converter are also responsible for the current sharing and switching when the input voltage is higher than, equal or lower than the output voltage.

The feedback signals of the MBCM270F338M235A00 are delivered to its control pin through voltage regulation loops. These feedback signals are then used by the controller to adjust the PWM duty cycle for it to maintain the output voltage.The logic control also allows the converter to run with a system frequency up to 500KHz and switch between buck and boost mode automatically, which leads to continuous voltage control.

In addition to the abovementioned application and working principle, the features like low voltage ripple, auto-detection of load status, protection against reverse voltage and over-temperature and over-current help make the MBCM270F338M235A00 an ideal choice for communication and power systems. With its wide range of input and output voltages, it is equipped to power any modern electronic equipment or to provide extra boost when needed.

The specific data is subject to PDF, and the above content is for reference