MBRF10100CT-JT

Series:	Automotive, AEC-Q101
Packaging:	Tube
Part Status:	Obsolete
Diode Configuration:	1 Pair Common Cathode
Diode Type:	Schottky
Voltage - DC Reverse (Vr) (Max):	100V
Current - Average Rectified (Io) (per Diode):	5A
Voltage - Forward (Vf) (Max) @ If:	840mV @ 5A
Speed:	Fast Recovery = 200mA (Io)
Current - Reverse Leakage @ Vr:	50µA @ 100V
Operating Temperature - Junction:	-55°C ~ 175°C
Mounting Type:	Through Hole
Package / Case:	TO-220-3 Full Pack, Isolated Tab
Supplier Device Package:	ITO-220AB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MBRF10100CT-JT

Introduction

MBRF10100CT-JT is a rectifier array for high temperature applications. Produced by ON Semiconductor, it has a load current rating of 10 A with a single device and 20 A for dual devices. This array is suitable for printed circuit board mounting, typically for high temperature applications up to 150℃ continuous operation, and contains four diode bridges combined to form an array which is housed in an MS-004AA package.

Applications

The MBRF10100CT-JT is suitable for use in a wide variety of electronics where the need for a single, dual or quad rectifier exists. It is commonly used in automotive power management systems, power supplies such as telecom, HVAC, and industrial, as well as lighting and appliances, UPS systems, and as a battery charger. Its high temperature capability makes it suitable for sensor and controller applications, such as automotive body control systems, and power supplies used in both indoor and outdoor applications.

Features and Benefits

The MBRF10100CT-JT is robust and durable, with a power rating of 35 W for operation between -55℃ and 150℃. The temperature protection differentiates it from others giving it superior performance in high temperature environments.This rectifier array is AEC-Q101-qualified, making it recommended for use in automotive applications and other consumer products, as well as providing a guarantee of robustness with regards to stress testing and high temperature endurance. The device has average on-state resistance of 0.4 mΩ and a package of axial leaded D-Sub that provides superior thermal dissipation.

Working Principle

The MBRF10100CT-JT rectifier array is made up of four diodes connected in an array to increase the power handling capability of a single diode and create an alternating current (AC) to direct current (DC) conversion. Each diode bridge consists of two diode pairs connected in parallel from the positive and negative inputs of the AC waveform.The two diodes connected in parallel for each waveform ensure redundancy and reliability by protecting against voltage spikes and current overloads. During the positive portion of the waveform, the positive diode is forward biased and conducts, while the negative diode is reverse biased and non-conducting. During the negative portion of the waveform, the negative diode is forward biased and conducts, while the positive diode is reverse biased and non-conducting. This results in DC voltage waveforms, with an average voltage in accordance with Ohm’s Law.

Conclusion

The MBRF10100CT-JT is a robust rectifier array designed for high temperature operation up to 150℃, and is suitable for automotive, industrial, and consumer applications. Its four diode bridges all working together in an array allows for efficient and effective conversion of AC to DC with low on-state resistance and excellent thermal dissipation. With this combination, the MBRF10100CT-JT is the ideal solution for any application that requires reliable and consistent rectification.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description