MBS10 RCG Discrete Semiconductor Products |
|
Allicdata Part #: | MBS10RCGTR-ND |
Manufacturer Part#: |
MBS10 RCG |
Price: | $ 0.00 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Taiwan Semiconductor Corporation |
Short Description: | BRIDGE RECT 1PHASE 1KV 800MA MBS |
More Detail: | Bridge Rectifier Single Phase Standard 1kV Surface... |
DataSheet: | MBS10 RCG Datasheet/PDF |
Quantity: | 3000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Diode Type: | Single Phase |
Technology: | Standard |
Voltage - Peak Reverse (Max): | 1kV |
Current - Average Rectified (Io): | 800mA |
Voltage - Forward (Vf) (Max) @ If: | 1V @ 1.5A |
Current - Reverse Leakage @ Vr: | 5µA @ 1000V |
Operating Temperature: | -55°C ~ 150°C (TJ) |
Mounting Type: | Surface Mount |
Package / Case: | 4-BESOP (0.173", 4.40mm Width) |
Supplier Device Package: | MBS |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
A bridge rectifier is a solid-state electrical device that converts alternating current (AC) to direct current (DC). The most common type of bridge rectifier uses four diodes; it is known as a diode bridge. The diode bridge, in combination with a transformer, is the most widely used method of converting AC to DC.
The MBS10 RCG is a bridge rectifier used in applications ranging from consumer electronics to industrial equipment. It offers an economical alternative to more complex full bridge rectifiers, and its small size makes it suitable for use in confined spaces. The MBS10 is also available in both surface-mount and through-hole packages.
The MBS10 RCG works on the principle that direct current flows in one direction and can only be reversed by switching the circuit. The rectifier consists of two inputs and two outputs. The inputs are connected to an AC power source, and the outputs are connected to a DC load. The four diodes in a bridge rectifier are arranged in a specific pattern so that the positive and negative input signals are connected in the appropriate sequence.
The AC signal enters the first diode, which allows current to flow in one direction. This current then passes through the second diode, which is connected in the opposite direction to the first diode, allowing current to flow in the other direction. In this way, the AC signal is split into two separate DC signals. These signals are then recombined by the third and fourth diodes, producing a single DC output signal.
The advantages of the MBS10 RCG include its low power consumption, high efficiency, and protected power output. Additionally, it is capable of handling high surge currents, making it well suited for use in DC motor control applications. The bridge rectifier is also protected against reverse bias and over-voltage conditions, making it a reliable and safe device.
The MBS10 is a versatile and affordable solution for most direct current applications, including motor control, power supplies, and more. It is also a reliable and efficient device, capable of handling high surge currents and other current demands. Regardless of the application, the MBS10 RCG is reliable and economical solution.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
MBS10 RCG | Taiwan Semic... | -- | 3000 | BRIDGE RECT 1PHASE 1KV 80... |
MBS1.00SV25 | Techflex | 132.43 $ | 2 | SILVER PLATED COPPER BRAI... |
MBS1.50SV25 | Techflex | 189.19 $ | 2 | SILVER PLATED COPPER BRAI... |
MBS1.00SV | Techflex | 252.25 $ | 2 | SILVER PLATED COPPER BRAI... |
MBS1.50SV | Techflex | 365.76 $ | 3 | SILVER PLATED COPPER BRAI... |
MBS10HRCG | Taiwan Semic... | 0.08 $ | 1000 | BRIDGE RECT 1PHASE 1KV 50... |
BRIDGE RECT 1PHASE 1KV 2A KBPMBridge Rec...
IC BRIDGE RECT 1.5A 100V WOMBridge Recti...
IC BRIDGE RECT 1.5A 50V WOMBridge Rectif...
RECT BRIDGE 1200V 90A MTKBridge Rectifie...
RECT BRIDGE 1A 240VBridge Rectifier Sing...
BRIDGE RECT 3 PHASE 800V 58ABridge Recti...