MC100EPT622FAG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MC100EPT622FAG is an ECL-to-ELTTL translators, level shifters, commonly referred to as a translator in the field of power electronics. The device provides two low voltage (VCC1 and VCC2) to high voltage (VCC3) levels of interface and circuits, converting signal levels between two, three and four circuits.

The MC100EPT622FAG is designed to provide signal level translation between circuits operating at different operating voltages and different logic families. It has an input signal level range of 0 to 20 V, a maximum output voltage range of 0 to 24 V, an operating temperature range of 0°C to 70°C and an operating frequency range of up to 4GHz.

The MC100EPT622FAG has an output voltage of VCC3 and an output current of up to 20 mA. It can also handle up to 5 ns of delay through its ECL-to-ELTTL level shifting mechanism. The device is also characterized by a low power device dissipated power of 5mW.

The device has five input pins; VCC1, VCC2, IN, VREF, and OUT. The VCC1 and VCC2 inputs are used to provide the power for the device. All the inputs are TTL compatible and can be driven by logic families such as ECL, ETL, ECLF, FTL, and LSTTL. The voltage at the OUT pin is determined by the voltage at the VREF pin.

The MC100EPT622FAG operates in monopolar mode. This means that the output voltage is either VCC1 or VCC2 depending on the logic level of the input. For a logic high input level, the output will be VCC1 and for a logic low input level, the output will be VCC2. Thus, the device has two different sets of power supply voltages, VCC1 and VCC2, which define the upper and lower limit of the output voltage.

The level shift output of the device is synchronized with the input levels. A synchronized output is produced when the input logic high and low levels are maintained within set limits. The device also has a built in noise cancellation circuit, which eliminates high frequency noise of up to 10kHz.

The MC100EPT622FAG is mainly used in circuit applications where there is a requirement to level shift between two, three and four voltage levels. This could include motor control, power monitoring, and bridge switching systems, as well as audio, video, and telecommunication applications. The device can also be used for power electronics applications such as switching, line side bipolar operation and synchronous rectification.

In conclusion, the MC100EPT622FAG is a highly capable, high speed ECL-to-ELTTL translator and level shifter, which provides a two low to high voltage level interface and circuits. The device is used in a wide range of applications and is characterized by a low power, high speed and highly reliable performance.

The specific data is subject to PDF, and the above content is for reference