MC10E1652L

Series:	MOSAIC III™
Packaging:	Tube
Part Status:	Obsolete
Type:	with Latch
Number of Elements:	2
Output Type:	Differential, ECL
Voltage - Supply, Single/Dual (±):	--
Voltage - Input Offset (Max):	--
Current - Input Bias (Max):	--
Current - Output (Typ):	100mA
Current - Quiescent (Max):	50mA
CMRR, PSRR (Typ):	--
Propagation Delay (Max):	--
Hysteresis:	27mV
Operating Temperature:	0°C ~ 85°C
Package / Case:	16-CDIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Supplier Device Package:	16-CDIP
Base Part Number:	MC10E1652

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MC10E1652L is a general-purpose comparator, which belongs to the linear - comparators subcategory. It functions as a high speed signal convertor with low power consumption levels and is especially suitable for use in high-speed signal conversions, transmission, and management. This comparator combines a unique set of features for the linear - comparators camp, including edge-triggered response, and minimal output loading. It also features low input overdriving, low propagation delay, and low input leakage current. The comparator is built with a special symmetrical output structure, designed to reduce noise.The MC10E1652L offers three operational modes that can be programmed depending on the nature of the application: (1)Push/pull output mode, (2) Open-drain output mode, and (3) Totem-pole output mode. Its low input leakage current makes the comparator suitable for high-impedance input nodes. Moreover, it offers wide supply range of 3V to 15V and has an operating temperature of -55°C to 125°C.The principle of operation of MC10E1652L can be divided in three parts. First, there is the comparator stage.The comparator stage compares two input signals (V1 and V2) against a reference voltage level(VREF) and produces an output based on the comparison. The outputs generated will be either high (logic 1) or low (logic 0). Second is the buffer stage. This stage acts as an interface between the comparator stage and the output logic stage. The purpose of the buffer stage is to convert the currents from the comparator stage to high-drive signals, drive the capacitive loads, or feed the high-impedance inputs.Third is the output logic stage.This stage regulates the output logic of the MC10E1652L. Depending upon the output modes chosen, the output logic stage will either drive the output signal itself or use it to trigger the external logic (Open-drain or Totem-pole).In summary, The MC10E1652L is a general-purpose comparator featuring very low power consumption and high-speed response. It can be programmed to use one of three operational modes, Push/pull output mode, Open-drain output mode, and Totem-pole output mode. The comparator has a low input leakage current and can drive moderately high capacitive loads. It is particularly suitable for high speed signal conversions, transmission, and management.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description