MC10H159FN

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MC10H159FN is a hex digit decoder/demultiplexer integrated circuit and is part of the Signetics 10H000 Family. It consists of six decoders that accept two binary inputs each and and provides 15 outputs for each input. It is designed for common-cathode and open-collector logic functions, and the outputs may be used to drive display devices such as LEDs, lamps, or LCDs. Its primary uses are in systems that require data encoding and decoding, such as kiosks and vending machines. The circuit is also used as an address decoder and is an ideal solution when discrete components would be too costly. The MC10H159FN is provided in a 14 pin DIP or a 14 pin SOIC package.

The MC10H159FN has two active-low inputs, A and B, and 15 active-low outputs, 0 through 15. It is powered by a single 3.3-5.25V supply and has an operating temperature range from 0-70°C. The two inputs are decoded to determine which of the 15 outputs is activated. The output logic is defined as follows:

O = A + B (A AND B = 0)

The device has two modes of operation, active-low and open-collector. In active-low mode, the active-low output logic is enabled. In open-collector mode, the device can be used as an inverter, buffer, or multiplexer. In open-collector mode, a pull-up resistor is required to ensure that the active-low output levels pull low to ground. The pull-up resistor must be connected to the externally-supplied +5V supply.

The MC10H159FN is mainly used in applications where digital data must be rejected or decoded, such as in data entry systems where a code must be transmitted from one device to another. The device can also be used as an address decoder, where the data must be relayed to a specific address. For example, the device can be used to decode an address and transmit data to the correct address when multiple devices are communicating over the same address bus. It can also be used in data acquisition systems, where it can be used to select the correct data signals.

The MC10H159FN is also used in system-level designs, such as in voting systems where the device is used to decode an address and enable an output corresponding to the voted option. The device can also be used as a decoder in video systems to display an image on a display device. In robotics, it can be used to decode a set of binary signals and output a corresponding command to the motors, sensors, or other components used in the system.

The MC10H159FN is a versatile integrated circuit that can be used in various applications that require data decoding, data entry, and address decoding. Its active-low and open-collector logic functions make it an ideal choice for a wide variety of applications. With its low power requirements, wide operating temperature range, and small package, the MC10H159FN is a great choice for cost-effective solutions.

The specific data is subject to PDF, and the above content is for reference