MC10H174M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MC10H174M is a 3-bit data selector/multiplexer with eight output lines and three active-low select lines. It is designed for use in high-speed data routing and data exchange. MC10H174M belongs to the Logic - Signal Switches, Multiplexers, Decoders category.

The MC10H174M is a 3-bit multiplexer that is used to select and route one of three input signals (A, B, and C) to one of eight outputs. It is commonly used in data and signal routing applications, operating at high frequencies. The MC10H174M can be used in single-ended or differential systems and is designed to operate over an extended temperature range.

The MC10H174M has three active-low select input lines (t1, t2 and t3) which allow the user to select one of eight output lines. The select input lines are latched and remain in the same state until a new category is selected. The three select lines are arranged in binary code and can be used to select up to eight different categories: 0000, 0001, 0010, 0100, 0101, 1000,1001 and 1111. The active-low select lines are used to form the address for the selected output line. The output enable (OE) line is used to enable or disable the output by energizing or de-energizing the output drive. This feature can be used to access multiplexed data at high speed, by only loading the data when the OE line is active.

In addition to its "select” capability, the MC10H174M has a 24-pin DIP package with four bonding pads, eight different output drivers, four output buffers and eight differential input buffers. The output drivers are designed to provide a low-impedance output and can drive up to 10mA at 5V levels. The power supply requirements are 5V with a tolerance of +5% and ±10%, making it suitable for applications in a wide range of environmental conditions. The MC10H174M is also designed to operate over an extended temperature range of 87°C (190°F) to +75°C (170°F).

The MC10H174M is designed to be used in a wide range of applications, such as interfacing with FPGAs, controlling data buses, data synchronizing, serializing/deserializing, multiplexing/demultiplexing and performing address selection in systems. Moreover, it is also suitable for applications in automotive, industrial and consumer electronics where data routing is required in a limited space. The MC10H174M can also be used in data links, analog and digital signal conditioning, clock and frequency synthesis and signal conversion.

The working principle of the MC10H174M can be explained in simple terms. The device uses three active low select lines (t1, t2 and t3) which means that a “low” signal on the select lines will select an output line. The MC10H174M also has an output enable line (OE) that must be “low” or energized in order for output data to be valid. When the select lines are all “high” then no output is selected and the output enable line (OE) will be “high”, disabling the data outputs. The MC10H174M could also be used in a programmable mode, where the three select lines are connected to one of the output lines to switch between the selected data sources.

In conclusion, the MC10H174M is a 3-bit data selector/multiplexer with eight output lines and three active-low select lines. This device can be used for multiple data routing and data switching applications, such as interfacing with FPGAs, video data synchronization, signal conditioning, and data multiplexing. In addition, it can also be used for programming data routing in a limited space. The MC10H174M can operate over an extended temperature range, has an output enable line for disabling data outputs, and is designed to provide a low-impedance output.

The specific data is subject to PDF, and the above content is for reference