MC14050BDR2G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MC14050BDR2G is a CMOS logic device from Texas Instruments, used for logic-level conversions. Specifically, the MC14050BDR2G falls under the Logic – Buffers, Drivers, Receivers, Transceivers category and offers an array of features and applications.

Used in most logic-level conversion needs, the MC14050BDR2G is a multi-channel power driver device with active current limiting, overheating protection, and overvoltage protection. This device has two open-drain output stages that provide an ideal level of current switching capacity to connect two isolated circuits. This device also provides “true” TTL compatibility, meaning that it can interface directly with commercial logic devices.

As such, the MC14050BDR2G is commonly used for low-voltage applications such as power switching, low-voltage to TTL logic level conversion, as well as automotive applications. It is capable of operating from a single 5.5V to 15V supply, and can switch up to 24V at up to 1A. In addition, it is optimized for use in environments that require limited power consumption, such as portable electronic devices.

How does the MC14050BDR2G work? The device consists of two power driver channels, each containing an active current-limiting circuit, an over-voltage protection circuit, and an overheating protection circuit. These circuits are designed to prevent damage to the device and its outputs when used in high switching-speed applications. When the device is connected to a power supply and driven by a switch, the output stage of each channel is controlled by a voltage regulator.

Each voltage regulator has a “low on” threshold and a “high off” threshold. When the input to the regulator is below the “low on” threshold (typically 0.7V), the output of the voltage regulator is ‘off’; when the input is higher than the “high off” threshold (typically 2.4V for CMOS devices), the output of the voltage regulator is ‘on’.

Once the output of the voltage regulator is ‘on’, the output of the MC14050BDR2G is driven to its high voltage level, which is typically 0V for most CMOS logic devices. The other output is driven to its low voltage level, which is typically 5V for most CMOS devices. As the input and the output are both driven to their respective voltage levels, the MC14050BDR2G is able to provide a logic-level conversion between two isolated circuits.

The MC14050BDR2G is an ideal choice for logic-level conversions in low-voltage, high-current applications. This device can be used to interface two logic-level circuits using a single power supply, and it can provide a reliable means of protection against over-voltage, overheating, and current overloads. Its small size simplifies the engineers task when implementing logical-level conversions, and it is an ideal choice for low-voltage and high-current applications.

The specific data is subject to PDF, and the above content is for reference