MC14050BFEL

Series:	4000B
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
Logic Type:	Buffer, Non-Inverting
Number of Elements:	6
Number of Bits per Element:	1
Input Type:	--
Output Type:	Push-Pull
Current - Output High, Low:	10mA, 40mA
Voltage - Supply:	3 V ~ 18 V
Operating Temperature:	-55°C ~ 125°C (TA)
Mounting Type:	Surface Mount
Package / Case:	16-SOIC (0.209", 5.30mm Width)
Supplier Device Package:	16-SOEIAJ
Base Part Number:	4050

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The MC14050BFEL is a logic device that can be used in a variety of applications to buffer, drive, receive, or transmit electronic signals. It is a versatile chip that is easy to integrate into almost any system design. This article will discuss the application field and working principle of the MC14050BFEL and how it can be used to simplify and enhance a circuit design.

Application Field

The MC14050BFEL is primarily used as a buffer, driver, receiver, or transceiver in logic circuits. It can be used to buffer digital signals of up to 20 MHz and is capable of driving up to 6 lines with both an active low and active high logic level. It can be used for a wide range of applications including microcontroller and FPGA communication, memory and I/O buffering, bus interface,serial communication and analog signal conversion.

Working Principle

The MC14050BFEL contains two sections, an input and an output section. The input section contains an array of input pins and a control register. The output section contains two logic levels (high and low) and an enable/disable input. The input pins are either connected to Vcc (high level) or to ground (low level). The control register allows the user to set the logic state of the output pins based on the state of the input pins. When the enable input is set to high, all of the outputs are set to the same logic level as the state of the corresponding inputs. When the enable input is set to low, all of the outputs are set to the same logic level as the control register.

Conclusion

The MC14050BFEL is a versatile device that can be used in a wide range of applications. It can be used to buffer digital signals, drive up to 6 lines, receive signals from a variety of sources, and transmit signals. Its two-section design makes it a simple and effective solution for many logic circuit designs.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description