MC18FD241F-TF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Mica and PTFE capacitors, such as the MC18FD241F-TF, are used in many electronic products. The MC18FD241F-TF has a wide range of applicability, including being used for high density capacitor applications, high frequency and/or long life applications, and for sensitive, high power, and temperature applications. Furthermore, the MC18FD241F-TF is a reliable and cost effective capacitor solution.

The MC18FD241F-TF is a PTFE (polytetrafluoroethylene) capacitor, which means that it is a ‘polymer’ capacitor, constructed with layers of PTFE insulation material in between two metal plates. This type of capacitor is often referred to as an RF (Radio Frequency) capacitor due to its high frequency range. This type of capacitor also generally operates in a much higher temperature range, than electrolytic or ceramic capacitors.

Unlike electrolytic and ceramic capacitors, mica and PTFE capacitors do not have any electrolyte, and therefore these capacitors are very stable. This makes them ideal for high frequency and/or long life applications. This also means that the capacitance of these capacitors remain relatively constant over time, making them a very reliable choice in sensitive applications. As such, they are commonly used for filtering, bypass, and signal coupling and decoupling applications, as well as motor starter and power supplies.

The technical specifications of the MC18FD241F-TF capacitors are as follows: the capacitance is 18pF, the temperature range is -55°C to 85°C, the maximum voltage is 20V, the dielectric strength is 90V/μs, and the maximum pulse voltage is 325V (at 1 ms pulse duration). The insulation resistance is greater than 200 megaohms, and the dielectric absorption ratio (DAR) is <0.5%.

The working principle of the MC18FD241F-TF is fairly simple. When the charge is applied to the capacitor, it begins to accumulate charge on the plates, creating a potential difference between the plates. This potential difference, in turn, causes an electrical field to form between the plates, one plate being positively charged while the other plate is negatively charged. The electrical field accumulates electrons on one plate and ions on the other plate. The electrical field between the plates also allows current to flow through the capacitor if a voltage is applied.

The amount of charge stored within the capacitor is determined by the ratio of the plate area to the distance between the plates, as well as the dielectric constant of the material between the plates. The capacitance is measured in Farads (F), and is the amount of charge accumulated on the capacitor with a 1volt difference across the plates. The ability of the capacitor to store a charge also depends on the size and type of material between the plates. In the case of the MC18FD241F-TF, the capacitance is 18pF.

In conclusion, the MC18FD241F-TF is a reliable and cost effective capacitor solution, offering a wide range of applicability across different applications. The MC18FD241F-TF can operate in high temperatures, does not require electrolytes, and is a highly stable capacitor, offering reliable capacitance over time. This makes it ideal for high frequency and sensitive applications, and its technical specifications make it suitable for motor starter and power supply applications. The working principle of the MC18FD241F-TF is the accumulation of charge on the plates and the formation of an electrical field between them, leading to a higher capacitance.

The specific data is subject to PDF, and the above content is for reference