MC74AC245N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MC74AC245N is a TTL-to-CMOS monolithic integrated circuit belonging to the Logic - Buffers, Drivers, Receivers, Transceivers category. Resistors and capacitors are external components necessary for the attenuation of high-speed signals and for setting the power supply voltage of MC74AC245N. It also provides higher speed and lower power consumption than the 74LS family of logic.

The appplication fields of MC74AC245N are as follows:

• When Crystal clocks are used, logic gates operate faster and consume less power than the common 74LS family
• It is used in digital circuits like Memory Address and Data Bus
• It is useful in High-speed clocking circuit
• In digital circuits where pulses have to be transmitted
• It is useful in embedded systems

The working principle of MC74AC245N is that the TTL logic levels are translated into CMOS logic levels and back again. When the input logic level is a low voltage (usually 0V), the output will be a high voltage (normally 5V). When the input logic level has a high voltage (usually 5V), the output will be a low voltage (normally 0V).

MC74AC245N comprises of 8 logic gates and has two types of logic outputs: 1) Tri-State, which allows the external circuit to determine the input and output state, and 2) Open Collector, which enables input and output to be either high or low. The device has 8 inputs and 8 output lines, some of which are inverted and non-inverted. The functions of each output line is selected by 8 pin-managed switches.

In order to achieve this high level of specificity and control, MC74AC245N has integrated Schmitt triggers logic. A Schmitt trigger is a high gain comparator with hysteresis which allows it to ignore noises, resulting in smoother output response. The hysteresis of the Schmitt trigger allows the output voltage of the device to only change once the input voltage has crossed a certain threshold.

Furthermore, the MC74AC245N can be configured to operate as either a Quad Open Collector (QOC), Tri-state (tri-state), or as both. The QOC output allows the device to sink current from external circuits, resulting in a logic low voltage. The tri-state output, on the other hand, is capable of setting an output line to float for an indefinite period of time.

In conclusion, the MC74AC245N family consists of 8 logic gates and is great for translating from TTL logic levels to CMOS logic levels, making it easy to interface with any system. It is well suited for high speed clocking circuits, digital circuits like memory address and data buses, and embedded systems.

The specific data is subject to PDF, and the above content is for reference