MC74HC373AFG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MC74HC373AFG is a type of logic latch that is commonly used in electronic circuits for buffering, storing, and transmitting digital data. It is designed to hold digital information in a stable state for signal conditioning purposes and can be used in logic applications such as multiplexing, signal synchronization, signal delay, and data conversion. The MC74HC373AFG belongs to the 74HC family of devices, which are high-speed CMOS (Complementary Metal Oxide Semiconductor) integrated circuits.

The MC74HC373AFG consists of two 3-state bus-oriented latch registers, each of which can hold up to 8 bits of data. The output of each register can be aligned with either the high or low priority of the bus in order to ensure that only the most recent data is transmitted. The device also has two enable pins, one active low and the other active high, which allow the user to control when the data is transmitted and when it is not.

In terms of its operating characteristics, the MC74HC373AFG can operate from a supply voltage of between 4V and 6V, has an output drive current of up to 10mA, an output voltage of between 2V and 6V, a fall time of 0.4 microseconds, and a rise time of 0.5 microseconds. The device also has a low power consumption, with a typical quiescent supply current of less than 10uA.

The MC74HC373AFG has a wide range of applications. In communications systems, it can be used for buffering in RS-232 and Ethernet applications. In computer systems, it can be used for buffering in USB, SATA, and parallel port applications. In medical applications, it can be used for signal synchronization and delay in cardiac monitors and CT scanners. In automotive applications, it can be used in CAN (Controller Area Network) systems. It is also often used in analog-to-digital and digital-to-analog signal converters.

The basic working principle of the MC74HC373AFG is relatively simple. Data is input into the latch by the data inputs (D0 – D7). The latch has two inputs, the enable and the inverse enable (ENBL and /ENBL). Depending on the voltage levels at these inputs, the data can either be enabled or disabled. When ENBL is high, the data is enabled and the data will be stored in the latch. When /ENBL is high, the data will be disabled and the contents of the latch will not be changed. When both the ENBL and /ENBL inputs are low (inactive), the data will be deselected and not stored in the latch.

The MC74HC373AFG is a versatile logic latch that is widely used in a range of industrial and consumer electronic applications. Its simple operating principle, low power consumption, and small footprint make it a cost-effective solution for many applications that require buffering, storing, and transmitting digital data.

The specific data is subject to PDF, and the above content is for reference