MC74AC273DWG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flip-flops are widely used in logic circuits in order to store binary information or change the sequence of the operation flow of the logic components. The MC74AC273DWG is a type of flip-flop designed by ON Semiconductor. It is of the positive-edge triggered type, meaning that it changes states upon receiving an active rising edge (i.e. logical 0 to logical 1) on its clock input, usually labeled "CLK".

The MC74AC273DWG is a D type flip-flop, meaning that the output of the flip-flop is the same as the data input of the flip-flop. This type of flip flop has two inputs and two outputs, a "D" input, a "CLK" input, a "Q" output, and a complemented "/Q" output. The "D" input is the data input, which is the data that the flip-flop will store. The "CLK" input is the clock input, which is used to control when the data input is accepted and copied to the output. When a logic high or low is applied to the "CLK" input, the data that is currently present at the "D" input will be stored to the "Q" and "/Q" outputs. The "Q" output is the positive output, while the "/Q" output is the inverse, or complemented output of the "Q" output. The outputs can be either set or reset depending on the state of the input signals.

The MC74AC273DWG is a bistable flip flop, meaning that the output has two stable states, one for high and one for low. This flip flop was designed for use in applications up to 49.4MHz, and is suitable for a wide range of applications including digital logic and analog application, timing and clocking circuitry, flip-flops, registers, counters, and memory elements. It has a low power consumption at a maximum of 8mA. Its maximum operating temperature is 85°C and it has a typical propagation delay of 13ns, making it an ideal choice for fast switching and logic operations.

The MC74AC273DWG can be used for a variety of different applications, including multiplexers, data-shifting, or any other application requiring a latch. This device can be used in the design of various control systems and algorithms, such as traffic control systems, water supply systems, robotic systems, or any other automated system which requires a chain of operations to be followed in order to achieve a desired result. It can also be used as a flip-flop in the design of various circuit logic such as counters and shift registers, where the data output changes with each tick of the clock signal. The device also allows for multiple data inputs to be stored to the output with every rising clock edge, thus allowing for the storage of multiple bits of information.

The MC74AC273DWG is a versatile device and can be used in a variety of circuits. Its small size and wide range of operation speeds makes it an ideal choice for any application where low power consumption, accurate timing and fast switching are required. Its ease of use and simple design make it an excellent choice for designing custom logic systems and algorithms for any purpose.

The specific data is subject to PDF, and the above content is for reference