MC74ACT161D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MC74ACT161D is a programmable logic device (PLD) commonly used in the counter, divider, and application field. It is part of the ACT series of logic devices from ON Semiconductor. This device has 16 logic outputs, two data input ports, and two enable ports. Additionally, it has two feedback inputs, two selectable frequency outputs, a programmable circuit configuration of 6-Bit counters, dividers, or applications, and an asynchronous reset. The MC74ACT161D allows for a wide variety of applications, from logic timers and digital displays to high speed counters, ring frequency dividers, and much more.

When powering the device, the two modes, the counter and divider, must be selected. The counter mode will accept inputs of up to 6-bit width, depending on the functionality of the device at any given time. The divider mode allows for a series of different frequencies to be chosen and incorporated into the output signal. The frequency is determined by the feedback inputs, which is being measured by the period input. This signal is then divided depending upon the user’s choice in the programming.

The MC74ACT161D device has two data input ports, A and B. These ports are used to receive data and instructions. The instructions are sent to the device and coded in a program called a PLA. The device will interpret the instructions and perform the necessary calculations as instructed. The two enable ports, ENA and ENB, control the output of the device. When enabled, the output will indicate either a pulse, high, or low signal, depending on the programming. The two feedback inputs, IA and IB, are used to reset the device when it times out or is turned off.

The MC74ACT161D can be used as a divider, producing different output frequencies. The input period is dependent on the clock frequency and is inversely proportional. As the clock frequency increases, the period decreases, and vice versa. By programming the device to the desired output frequency, the divider can output a frequency specified by the user.

The advantages of using the MC74ACT161D device can be seen in the reduced cost and power consumption associated with larger PLDs. The device features an asynchronous reset which allows for easy control and programming. Additionally, the two selectable frequency outputs, two feedback inputs and two data input ports allow for multiple applications and implementations.

Overall, the MC74ACT161D device is a powerful and efficient programmable logic device ideal for the counter, divider and other application field. By allowing a user to configure their own programmable circuit, the device provides the flexibility needed in a broad range of applications. Additionally, its low cost and power consumption help to reduce overhead while keeping performance and precision at an optimal rate.

The specific data is subject to PDF, and the above content is for reference