MC74ACT241DWR2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MC74ACT241DWR2 is a logic device from the buffers, drivers, receivers, transceivers category. It is a single 8-bit buffer/driver with 3-state output which is configured to be non-inverting. The device is used to convert TTL voltage levels to MOS and CMOS compatible levels and vice versa, when used with suitable pull up and pull down resistors. It also provides gates with increased drive characteristics.

The MC74ACT241DWR2 provides logic buffering and driving in a small packages. It is the perfect choice for applications requiring low power and small size such as demanding embedded and control circuits. This device provides TTL levels of voltage, which allow for direct interfacing with TTL logic devices.

The working principle of the MC74ACT241DWR2 is based on an open collector input/output circuits. The outputs are wired in an open collector/drain configuration, meaning that when the output is active, the low voltage is pulled to ground from the open collector output. This configuration allows for the output to be driven by other logic gates. However, when the output is disabled, no current flows through the output, so the output is in the high impedance state. The outputs are designed to sink 16mA.

The device also has a very wide input voltage range, between 0V and 5V. It allows for compatibility with higher voltage levels such as 3.3V or 5V, provided the appropriate power supply levels are connected. In this way it is possible to achieve TTL level logic with lower voltage levels.

The MC74ACT241DWR2 provides an integrated over-voltage protection circuit that prevents potential damage to the device. The integrated overvoltage protection circuitry turns on instantly when a voltage over 5V is applied to the device, making it perfect for use in applications requiring High Voltage handling.

The MC74ACT241DWR2 can be used in many different applications, such as data transmission and multiplexing. It is also used for general-purpose buffer and driver applications, such as data transmission, multiplexers and many other applications which require superior switching capabilities. It can also be used for controlling LEDs and other devices.

The MC74ACT241DWR2 is designed to provide superior switching performance. It utilizes a low power schottky technology that produces high speed at low power consumption. It is capable of switching frequencies up to 64MHz with a maximum power consumption of 8mA. Additionally, it has an integrated Thermal Stress Protection which prevents potential damage due to high temperature.

The MC74ACT241DWR2 is an easy to use device. It is easy to connect because of its standard 14-pin packages and TTL compatible pinouts. It also has an ESD protected design for improved electrical reliability and fewer board problems. Moreover, it is designed for smaller footprints, making it ideal for hand soldering and easy manipulation.

The MC74ACT241DWR2 is an ideal solution for low power, low noise and integrated protection logic device. It has a wide range of applications and is the perfect choice for embedded and control circuits. Furthermore, it has a low power dissipation and high performance, allowing it to be used in many different applications.

The specific data is subject to PDF, and the above content is for reference