MC74HC125ADTR2G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MC74HC125ADTR2G is a Logic - Buffers, Drivers, Receivers, Transceivers. It is a high speed logic device with three state outputs, which are ideal for use in applications requiring a logic signal to be directed to multiple loads. The device is available in three different operating voltages and is specified for operation over the extended industrial temperature range of -40 to +85 degrees Celsius.

The MC74HC125ADTR2G has four inverting buffers, a high speed non-inverting buffer and a three state output with an enable control Multiplexer. The output control is done by two active low enable inputs, EnA and EnB, which enables or disables the output. An output Y can also be set high-impedance when no device is connected.

The MC74HC125ADTR2G is designed to drive its output down to the specified voltage levels at the specified AC and DC parameters, regardless of the device\'s load. The device is designed to reduce load capacitance and supply current requirements when used in long line battery applications.

The device works by using an input A to an inverting buffer and an input B to a non-inverting buffer. The signals are then sent to the output Y. An Enable input can be used to control the output Y, depending on the logic levels of the Enable inputs. When both Enable inputs are in the low state, the output Y is in the high-impedance state. When either Enable input is a high, the output Y will reflect the logic states of the inputs A and B.

This makes the device ideal for use in applications where one signal is to be sent to multiple loads. An example of this could be a microcontroller application that needs to process logic signals from multiple sensors and send a response to the microcontroller. The MC74HC125ADTR2G can be used to multiplex the logic signals from the different sensors and send the response signal to the proper output without any cross talk or interference.

The device also supports both synchronized and non-synchronized input and output signals. The output is well suited for driving low-capacitance bus lines. Synchronized signals are used in applications where precise timing is required, such as high-speed data transmission. The device can be used to boost the logic signals from a slow processor and push them out on a high-speed bus line.

In summary, the MC74HC125ADTR2G is a Logic - Buffers, Drivers, Receivers, Transceivers which are perfect for applications requiring precise timing and multiplexing of a single output signal to multiple loads. The device supports both synchronized and non-synchronized inputs and outputs, has low current consumption and is designed to reduce load capacitance and supply current requirements. The device is available in three different operating voltages and is specified for operation over the extended industrial temperature range of -40 to +85 degrees Celsius, making it a great choice for industrial applications.

The specific data is subject to PDF, and the above content is for reference