MC74HC574ADTR2G Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic - Flip Flops have the ability to operate as a basic memory element which is useful in many everyday applications. The MC74HC574ADTR2G is one such component used in this field.

In terms of its physical characteristics, the MC74HC574ADTR2G is a high performance octal D-type flip-flop with 3-state outputs. It consists of eight edge-triggered D-type flip-flops with independent data inputs (D0-D7). To access or write data to the component, use the eight active-low chips select inputs CS0-CS7. As for the component’s power requirements, the operating voltage required is 2 to 6V.

From a functional standpoint, the MC74HC574ADTR2G outputs a stored data bit when the appropriate chip select input is asserted and the clock signal is logic LOW. The stored information is also available whenever the chip select input signal exists and the component’s output enable signal is enabled.

One of the many applications of the MC74HC574ADTR2G is to increase the interface capabilities of existing systems, allowing the simultaneous and synchronous transmission of information between machines. For example, the component can be used to store and send binary data over a network or between two machines. Another use is as part of a larger logic system that can read, store and process data.

From a working principle standpoint, the MC74HC574ADTR2G is designed to store binary data using asynchronous-level triggered storage elements. This means that the data is stored when the trigger levels, which are determined by the chip select and clock signals, are exceeded. When the trigger levels are reduced beneath their stated thresholds, the data is then output from the component.

In summary, the MC74HC574ADTR2G is an octal D-type flip-flop with 3-state outputs which forms part of the wider Logic - Flip Flops family. It is used to increase the interface capabilities of existing systems and to store and send data between computers and machines. It is a useful component due to its asynchronous-level triggered storage elements which store data when levels determined by the chip select and clock signals are exceeded.

The specific data is subject to PDF, and the above content is for reference