MC74LVX374DWR2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flip flops are digital devices used to store binary data, and they are among the most basic components of digital electronics. The MC74LVX374DWR2 flip flop is a low-voltage, Schmitt-Trigger device designed for use in 3.3V systems. It counters the problem of the difficulty in driving TTL logic with the small logic levels found on many CMOS devices.

The MC74LVX374DWR2 flip flop is a four-bit wide dynamic logic flip-flop with three-state outputs. It is designed to minimize the power consumption and take up less space in a system. This device has two power supply pins (VCCA, VCCB): VCCA for logic, and VCCB for its I/O\'s. This allows power savings because the I/O supply current value has been optimized by minimizing the active current.

In terms of application fields, the MC74LVX374DWR2 flip flop is typically used in memory buses, clock buffers, data latches/registers, signal routing, and data transmission. It is suitable for use in any circuit requiring a logic element with low power consumption, small size, low noise, and good signal integrity.

Regarding its working principle, the MC74LVX374DWR2 flip flop consists of four independent Flip-Flop circuits. Each of these has its own data and clock inputs. When a positive-going pulse is applied to the clock input, the data applied to the flip flop at that instant will be stored inside the Flip-Flop. The stored data can then be accessed via three-state output buffers. This is known as latching or storing data.

The latch has two features that make it useful for digital data storage. First, it can store data even when power is removed, as long as the voltage is stable. Second, the clock input is synchronous, meaning that the stored data is valid only when the data and the clock are correct at the same time. This makes the Flip-Flop more reliable and fault tolerant.

The MC74LVX374DWR2 flip flop is designed to operate with very little noise and has a Schmitt Trigger action, which helps suppress ringing and makes it suitable for high-speed applications. It also has an internally generated threshold voltage, which makes it easier to interface to low voltage devices. In addition, it has on-chip self-protection circuitry which helps protect it against damage from static electric discharge.

Overall, the MC74LVX374DWR2 flip flop is an excellent choice for applications where low power consumption, small size, low noise and good signal integrity are of utmost importance. Its many features make it a reliable and robust choice for applications where data needs to be stored and retrieved quickly and accurately.

The specific data is subject to PDF, and the above content is for reference