Allicdata Part #: | MCA231-X009-ND |
Manufacturer Part#: |
MCA231-X009 |
Price: | $ 0.00 |
Product Category: | Isolators |
Manufacturer: | Vishay Semiconductor Opto Division |
Short Description: | OPTOISO 5.3KV DARL W/BASE 6SMD |
More Detail: | Optoisolator Darlington with Base Output 5300Vrms ... |
DataSheet: | MCA231-X009 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Output Type: | Darlington with Base |
Supplier Device Package: | 6-SMD |
Package / Case: | 6-SMD, Gull Wing |
Mounting Type: | Surface Mount |
Operating Temperature: | -55°C ~ 100°C |
Vce Saturation (Max): | 1V |
Current - DC Forward (If) (Max): | 60mA |
Voltage - Forward (Vf) (Typ): | 1.1V |
Current - Output / Channel: | -- |
Voltage - Output (Max): | 30V |
Series: | -- |
Input Type: | DC |
Rise / Fall Time (Typ): | -- |
Turn On / Turn Off Time (Typ): | 10µs, 30µs |
Current Transfer Ratio (Max): | -- |
Current Transfer Ratio (Min): | 200% @ 10mA |
Voltage - Isolation: | 5300Vrms |
Number of Channels: | 1 |
Part Status: | Obsolete |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optoisolators are a type of electrical components used to provide electrical isolation between input and output circuits while providing electrical interconnection between them. The isolation between input and output eliminates dangerous currents and voltages in the output circuits of the optoisolator. MCA231-X009 is one type of optoisolator belonging to the Transistor, Photovoltaic Output family.
Overview of MCA231-X009
The MCA231-X009 is a 6 Pin optoisolator that has a built-in photovoltaic receiver which drives a NPN transistor. It has a general purpose logic family DIP-6 type package (Dual In-line Package) which makes the device suitable for a wide range of applications. It is composed of an infrared emitting diode and a photovoltaic-isolated NPN transistor in a plastic DIP package. The diode is the source of infrared light which is detected by the photovoltaic receiver integrated within the plastic packages. The output NPN transistor allows current to be switched from the collector to the emitter with only a small amount of optically induced base current. The typical across isolation voltage is 2500Vrms. The leakage current at the output is typically 500nA and the On/Off ratio is typically 10:1 or more. The device also has a high response time, 2.3ms, and a low input current, typically 0.5mA.
Applications of MCA231-X009
The MCA231-X009 is a preferred optoisolator for a wide range of applications such as motor control, switching and interface circuits. It is suitable for low power-handling up to 100mA. It is ideal for use in safety-related applications due to its high isolation voltage. The high input resistance of the optoisolator helps limit the current drawn by the input circuitry. The device can also be used as a photo sensor in commercial security systems since it has a high response time and a high off-state current leakage. It is also suitable for device isolation when interfacing two different microprocessor-controlled systems.
Working Principle of MCA231-X009
The MCA231-X009 is composed of an infrared emitting diode and a photovoltaic cell protected by an electrically isolated plastic package. When the diode is energized, infrared radiation is emitted. This radiation is then sensed by the photocell which generates a voltage difference between the collector and emitter of the output NPN transistor. This voltage difference will cause the base current of the output transistor to flow, which will in turn cause the output transistor to turn on, closing the circuit. When the diode is no longer energized, the infrared radiation will no longer be detected and the output transistor will no longer receive the voltage difference. Thus, the output transistor will turn off, opening the circuit.
Conclusion
The MCA231-X009 optoisolator is one of the most versatile optoisolator devices available in the market today. It has a high isolation rating and can be used in safety-related applications as well as device isolation. Its high response time and low input current make it suitable for use in photo sensing and motor control applications. Furthermore, its DIP-6 plastic package ensures that the device is easy to install in a wide range of circuit designs.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
MCA231-X009 | Vishay Semic... | 0.0 $ | 1000 | OPTOISO 5.3KV DARL W/BASE... |
MCA231-X009T | Vishay Semic... | 0.0 $ | 1000 | OPTOISO 5.3KV DARL W/BASE... |
MCA231 | ON Semicondu... | 0.0 $ | 1000 | TRANSISTOR OPTOISOLATOROp... |
MCA2711 | Honeywell Se... | 32.21 $ | 1000 | SWITCH PLUNGER ASSMBLY |
MCA2711H | Honeywell Se... | 26.96 $ | 1000 | SWITCH PLUNGER ASSMBLY |
OPTOISO 5.3KV TRANS W/BASE 6DIPOptoisola...
OPTOISOLTR 5KV TRANSISTOR 4-SMDOptoisola...
OPTOISOLTR 5KV DARLINGTON 4-SMDOptoisola...
OPTOISOLATOR 5KV DARLINGTON 4SMDOptoisol...
OPTOISO 4.17KV TRANS 6DIPOptoisolator Tr...
OPTOISO 5.3KV TRANSISTOR 4SMDOptoisolato...