MCB10JB11K5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A Through Hole Resistors, or a THR, is a small, low-cost device which can be used to provide a simple yet effective way to attenuate and/or redirect an electrical signal. The device is comprised of two electrical conductors – the resistor and the integral diode – sandwiched within a ceramic body known as the resistor body. The resistor body houses a collection of resistive elements which are designed to change the flow of current in an electrical circuit within a given range. The resistor is designed to have a specific resistance value and to reach a set maximum continuous operating temperature as specified by the manufacturer. While there are a few variations, most Through Hole Resistors have three leads – one for the resistor, one for the integral diode and one for the resistor body itself.

The MCB10JB11K5 is one specific type of Through Hole Resistor which has become increasingly popular for use in medical equipment, automotive applications, and telecommunication circuitry. It is a surface mount type device which is constructed to meet the requirements of DC power distribution systems, and its three lead design is ideal for situations where a low-cost, reliable solution is needed. The MCB10JB11K5 offers a 10kΩ resistance value and a combined feedback and diode circuit in a miniature 386 mil pitch package for use with printed circuit boards. The resistance value can be fixed or adjusted depending on the requirements of the application and the operating temperature of the device is rated in the 0-85°C range.

The primary purpose of the MCB10JB11K5 is to provide an effective way to reduce the force or energy of an electrical signal. By introducing the resistance elements within the device’s ceramic body, the current signal is forced to reduce in strength so that the output can become more manageable and controllable. The integral diode works simultaneously with the resistor to form an electrical signal rectifier, providing fast and efficient signal attenuation while avoiding the introduction of any unwanted spikes or transients. The entire device is held in place with the use of solder, allowing for a tight connection and ensuring a stable connection between the board and the device.

The MCB10JB11K5 is not only useful for signal attenuation or rectification, but also finds use in situations where a low-cost, efficient solution is needed. For example, it is common to use the device in transistorized amplifiers, where the resistor is used to maintain a constant and steady output from the amplifier. Additionally, the MCB10JB11K5 has been used in power supply circuits to provide over-current protection. If too much current is present, the diode within the resistor can provide a safe and effective way of preventing the overload from damaging the downstream elements of the circuit.

Ultimately, the MCB10JB11K5 is an invaluable device for Through Hole Resistors, as it offers a low-cost solution to the attenuation of electrical signals and the protection of downstream components within a circuit. Its miniature size and versatile operating temperature make it suitable for use in a variety of applications, ranging from medical equipment to audio systems. As such, it is likely to remain a popular device in the electronic industry for many years to come.

The specific data is subject to PDF, and the above content is for reference