MCBC1250CF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid State Relays (SSRs) are electrical engineering components that transfer electrical energy from one circuit to another without physical contact between the two. SSRs are widely used in industrial and commercial applications to control process variables, such as temperature, pressure, flow or other physical parameters. The MCBC1250CF is a type of Solid State Relay that can be used for a wide range of applications, including motor control, AC switching, light dimmers, and various other industrial and commercial applications. In this article, we will discuss the application field and working principle of MCBC1250CF.

MCBC1250CF has a wide variety of applications. It can be used in process control, instrumentation, automotive control, motor control, power and lighting control, HVAC, industrial automation, and other applications that require precise control of current and voltage. The MCBC1250CF is a zero-crossing type SSR, which means that it provides a switching pulse at the exact zero-crossing point of an AC wave cycle. This allows for precise control of the load current and has the advantage of being able to switch loads without generating electrical spikes or noise. This zero-crossing switching eliminates the possibility of damaging sensitive equipment that is connected to the load.

The MCBC1250CF is a solid-state relay with two input terminals (S1 and S2) and two output terminals (L1 and L2). The relay is activated when the voltage across the input terminals (S1 and S2) is lower than the reference voltage, typically 3.3V. The reference voltage is set using a microprocessor or switch. When the voltage across the input terminals is higher than the reference voltage, the relay is deactivated.

Once the input voltage is higher than the reference voltage, the MCBC1250CF begins to switch its power outputs, in which the output current is proportional to the input voltage. The MCBC1250CF has a power output range from 75 to 1500 watts, which allows it to be used in a variety of applications. The output range is adjustable and the output current can also be adjusted to provide a consistent current for consistent control of the output.

The MCBC1250CF also has two control signals, which are active when the relay is turned on or off. It has an enable signal (EN) which is used to activate the relay and a disable signal (DIS) which can be used to disable the relay. When the EN signal is active, the relay is turned on, and when the DIS signal is active, the relay is turned off.

The MCBC1250CF also has a built-in protection circuit. This protection circuit is important to protect the relay from overcurrent or short circuit conditions. The protection circuit monitors the load current and automatically shuts off the relay if an overload or overcurrent condition is detected.

The MCBC1250CF is an ideal solution for applications that require precise control of current and voltage. It is reliable, cost-effective and can be easily integrated in a variety of applications. Its wide range of applications, adjustable output range, and built-in protection circuit make it the perfect choice for a variety of industrial and commercial applications.

The specific data is subject to PDF, and the above content is for reference