MCC310-12IO1 Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

An MCC310-12IO1 is a 25A Silicon-Controlled Rectifier (SCR) module which is used to convert low voltages of AC and DC into higher voltages. It works by being triggered by a small current which switches on a larger current, thus controlling the voltage in a circuit. This is done via the principle of thyristorised control.

The MCC310-12IO1 is mainly used in motor control, AC-DC power conversion, surge protection, and high-frequency lighting applications. In motor control applications, the MCC310-12IO1 can be used to control large motors by providing accurate and dependable switch action. It is capable of turning loads on or off depending on the voltage levels set. As such, it can be used in both DC and AC driven motors. It\'s also used in high-frequency lighting applications, where it acts as a switch in controlling the light output, providing a regulated power output. Finally, the MCC310-12IO1 can also be used in surge protection applications, where it can be used as a means of limiting the amount of current that is allowed to flow through the system.

The MCC310-12IO1 works by making use of a thyristorised control principle that controls a certain amount of current depending on the voltage present in the circuit. This control is enabled through a Gate electrode, which must be triggered by a small current, so as to switch on the larger current. This is done when a positive potential is applied to the Gate, which then triggers the Anode current. Once the Anode current is triggered and the anode voltage level is greater than the Breakover Voltage, the thyristorised control is complete. Once the Gate and Anode connections are completed, the MCC310-12IO1 will stay in the on or off state until either the voltage drops or the Gate electrode is no longer triggered by a small current.

In conclusion, the MCC310-12IO1 is a SCR module mainly used in motor control, AC-DC power conversion, surge protection, and high-frequency lighting applications. It works by using a thyristorised control principle in which the amount of current passing through the device is determined by the voltage present in the circuit. This is achieved by turning the device on or off by applying a small current to the Gate electrode, which is then used to trigger an Anode current when the anode voltage level is greater than the Breakover Voltage. By making use of these principles, the MCC310-12IO1 is then able to accurately and reliably control the voltage in a circuit.

The specific data is subject to PDF, and the above content is for reference