MCF08062G330-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode Chokes (CMCs) are voltage-controlled impedance devices which are typically used to isolate noise or stop electromagnetic interference (EMI). The MCF08062G330-T is an example of a common mode choke, and it is widely used in power electronic applications due to its high current rating and low core loss. In this article, the application field and working principle of the MCF08062G330-T will be discussed.

The MCF08062G330-T is a planar type common mode choke, which is designed for use in automotive powertrain and transmission systems, and has a continuous current rating of 2.77A and an effective voltage rating of 1000V AC. It is also suitable for use in other applications where EMI suppression, noise isolation, and EMC protection are required. The MCF08062G330-T is made of a ferrite core and multiple levels of windings. Each winding is wound with enameled copper insulated wire with a diameter of 0.16mm, and the core is made of high permeability ferrite material, which has an excellent frequency range (3MHz to 40MHz).

When it comes to the working principle of the MCF08062G330-T, it is based on inductance. It works by blocking the flow of current in one direction while allowing it to pass in the opposite direction. This is achieved by creating a magnetic field that opposes the current, which in turn causes it to be dissipated. The higher the current, the stronger the magnetic field, and the stronger the opposition. Thus, the current is effectively blocked and the interference from high frequency signals is greatly reduced.

The MCF08062G330-T is also highly effective in reducing EMI. This is due to its ability to attenuate conducted transmissions, thus reducing the amount of energy that is transmitted through the wire. The choke works as an effective filter, allowing only the desired signals to pass through the wire. This is due to its high permeability ferrite core, which is able to effectively absorb the unwanted interference.

In conclusion, the MCF08062G330-T is a highly effective common mode choke, with a high continuous current rating and low core loss. It is capable of effectively attenuating conducted transmissions, reducing electromagnetic interference (EMI), and providing EMC protection. It is therefore ideally suited for use in automotive powertrain and transmission systems, and other applications where EMI suppression and noise isolation is required.

The specific data is subject to PDF, and the above content is for reference