MCNC48102J

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays are widely used in electronic circuit design, and MCNC48102J is one of the most common resistor network used by electronic designers. MCNC48102J is a 48-terminal surface-mount device which is composed of two 10K 3-terminal chip resistors having independent wipers and one common 2-terminal network. The wiper of each chip is independently adjustable over its associated third terminal resistance and the common 2-terminal network.

The first major application of MCNC48102J is as a signal attenuator for audio applications. As the signal attenuator, it provides a relatively low source resistance and an adjustable tap on the output side. This adjustable tap allows fine-tuning of the output signal level while maintaining the signal source impedance. By adjusting the tap, the output signal level can be adjusted to the desired level.

The second application is as a voltage divider. The adjustable tap on the output side of the device allows for a precise division between the input and the output voltage. This can be used for controlling the gain of an amplifier or other electronic systems. By adjusting the tap, the division of the voltage can be adjusted to the desired level. This allows for fine-tuning of the system to ensure optimum performance.

The working principle of MCNC48102J is based on two resistors connected in parallel and a tap point which is adjustable. The tap point can be adjusted to control the ratio of the two resistors. When the tap is on the side with the higher resistor, the output voltage is greater, and when it is on the side with the lower resistor, the output voltage is lower. This is used to create adjustable attenuators and voltage dividers as described above.

When using MCNC48102J, the user needs to select the proper tap point so that the desired performance level can be achieved. The tap can be adjusted by hand or by a motorized system. It is important to make sure that the motorized system is properly calibrated so that the desired tap point can be achieved. In addition, since the device is a surface-mount device, it is important to make sure that the device is properly mounted to ensure methodical operation.

In conclusion, MCNC48102J is a versatile surface-mount resistor network which can be used for both signal attenuation and voltage division applications. The device is composed of two 10K 3-terminal chip resistors having independent wipers and one common 2-terminal network. The tap point between the two resistors can be adjusted by hand or by a motorized system to achieve the desired performance. When using the device, it is important to make sure that it is properly mounted and calibrated to ensure methodical operation.

The specific data is subject to PDF, and the above content is for reference