MCP1632T-AAE/MC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MCP1632T-AAE/MC is a high-performance dcdc switching controller designed to help modernize system power regulation technologies. It is primarily used in applications such as dc-dc converters, point of load regulators and magnetic resonance imaging systems.

It is a fully integrated part with an on-chip boost regulator and 4-channel driver. It offers high performance with low power draw and efficient operation. It has a switch current of 2A and an input voltage range of 2.7V to 15V. The output voltagemax is 28V and the operating MCP1632T-AAE/MC temperature range is from -40°C to +125°C. It also has a switching frequency of 200 kHz, allowing for greater power density without compromising noise impact.

In terms of features, the device provides a power saving mode and a programmable mode that can be used to achieve low-power low-frequency operation. It also has a built-in analog-to-digital converter that enables accurate voltage regulation. Furthermore, it offers convenient features such as over-current protection, undervoltage-lockout, and overtemperature protection.

The device is primarily used as a dc-dc converter in applications where high power is required. It enables the conversion of a higher input voltage into a lower output voltage thus providing better control of the output voltage. It can also be used in point-of-load regulators, where it enables efficient regulation of voltage in hard-to-drive applications. Lastly, it is also used in magnetic resonance imaging systems where it is used to maintain a specific power throughput in the system.

The MCP1632T-AAE/MC works through its PWM controller, which is responsible for generating a pulse-width modulation signal to control the switching of the power switch. This signal is generated by setting the duty cycle and frequency parameters. When the duty cycle input is set to high, a high-frequency switching signal is generated, while a lower frequency signal is generated when the duty cycle is set to low. This signal is then passed to the gate driver, which amplifies the signal appropriately and switches the power switch.

The output voltage is controlled by the internal voltage-mode PWM controller. It receives a voltage reference signal from an external source and compares it with the voltage at the output of the power switch. Depending on the difference, the PWM duty cycle is adjusted accordingly. The higher the duty cycle, the higher the voltage at the output of the power switch and vice versa.

The MCP1632T-AAE/MC also has built-in protection features. It has over current protection, under voltage lockout, and over temperature protection. Over current protection will activate if the current draw exceeds the maximum rating and shuts down the power switch to prevent damage to the system. Similarly, under voltages lockout will prevent the device from operating in a suboptimal range and over temperature protection will prevent the device from getting damaged due to excessive heat.

The MCP1632T-AAE/MC is an efficient and powerful dcdc switching controller that is used in a wide variety of applications. It offers great performance and low-power operation. It also has a range of safety features and is extremely accurate, making it ideal for high-precision regulating applications. Additionally, the design of the device allows for easy implementation in a range of circuit designs.

The specific data is subject to PDF, and the above content is for reference