MCP2003BT-E/MC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

An MCP2003BT-E/MC is a full-speed transceiver buffer, specifically designed to provide a Physical Layer (PHY) interface between one Fujitsu USB device and the universal serial bus (USB). It can provide the electrical signal necessary to drive signals across a USB cable while the internal buffer performs bi-directional data movement with bus control features. This interface can be used in communication applications and consumer electronics, including Digital Still, Video, and Audio Systems.

The MCP2003BT-E/MC allows for an optimal physical layer performance. This allows the driver and receiver of the USB bus to perform better. The transceiver has an operating range from 1.0V to 3.6V and is fully functional from 3.0V to 1.8V. This allows for longer data transmissions and can be useful in applications that require low power operation.

The MCP2003BT-E/MC features a Dual Data Rate transceiver that can drive output signals up to 1 Mbps and receive signals up to 1 Mbps. It supports bi-directional communications and the ability to determine bus occupancy. The device also incorporates a differential receiver with a built-in voltage-controlled amplifier (VCA) and demodulator. The VCA allows the receiver to reject electro-magnetic interference and provide equal input impedance along the entire length of the USB cable.

This interface includes a built-in on/off control, overvoltage protection circuit, and a low-power shutdown mode. It also enables system-level power management, including sleep and standby modes. This makes the MCP2003BT-E/MC an ideal choice for low-power applications.

The built-in control logic of the MCP2003BT-E/MC enables USB transaction processing and allows for fast data transfer. This can be useful in communications systems, where data must be transferred quickly and reliably. It also allows for the detection of bus errors and the generation of data strobe pulses generated by the device. This allows for an efficient use of USB bus resources, making it a great choice for data streaming applications.

In conclusion, the MCP2003BT-E/MC is a full-speed transceiver buffer, specifically designed to provide a Physical Layer (PHY) interface between one Fujitsu USB device and the universal serial bus (USB). It features an operating range from 1.0V to 3.6V and is fully functional from 3.0V to 1.8V, making it an ideal choice for low-power applications. The device also includes a Dual Data Rate transceiver for driving output signals up to 1 Mbps and receiving signals up to 1 Mbps, as well as built-in on/off control, overvoltage protection circuit, and a low-power shutdown mode. This makes the MCP2003BT-E/MC an optimal choice for communication applications and consumer electronics.

The specific data is subject to PDF, and the above content is for reference