MCP25055-I/P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MCP25055-I/P is an interface, I/O Expander that is designed to expand the number of I/O lines for microcontrollers and other devices. It is a simple, low cost, and low power device, which can be used to add more input and output lines, to provide an economical solution for increasing the I/O capability of microcontroller-based systems.

The MCP25055-I/P is a general purpose I/O expander designed for use with a variety of microcontrollers and other digital devices. It consists of an 8-bit data bus and four general-purpose I/O lines which are configurable as either inputs or outputs. The I/O lines can be used for inputs and outputs of digital signals such as occupancy sensors, status indication signals and control inputs. The I/O expander also includes an on-chip voltage regulator that can provide a regulated output voltage of up to +5 V to supply power to external devices.

The device utilizes a SPI bus with three signals: the Serial Clock (SCK) line, the Serial Data (SD) line, and the Chip Select (CS) line. The SCK and SD lines are used to transfer data to and from the device. The CS line is used by the host device to select the I/O expander. The device can also be set to enable and disable I/O expansion mode.

The MCP25055-I/P application field and working principle is designed for a wide range of applications including digital input and output control for industrial automation and instrumentation, as well as for consumer electronic applications. It can be used to provide more inputs and outputs for microcontrollers in digital systems to increase the I/O capabilities of the system. The device can be used in a variety of ways, including providing additional inputs and outputs in an existing system, or even providing an connection bridge to an external system.

The MCP25055-I/P is a 3-volt, low-power device that operates on a single +3.3-volt power supply. It has an SPI bus interface to allow communication between the host device and the I/O expander. The I/O expander has two 8-bit registers, one for data and one for configuration and status. The data register can be used to write data to the I/O pins, while the configuration and status register can be used to configure and read the I/O pins. This register also allows the user to read the current status of the I/O pins and set the direction of the I/O pins.

The MCP25055-I/P is a simple, low cost, and low power device, which can be used to add more input and output lines, to provide an economical solution for increasing the I/O capability of microcontroller-based systems. Its many features, along with its small size and low power consumption make it ideal for a wide range of applications. It is also highly adaptable and can be easily integrated into existing systems.

The specific data is subject to PDF, and the above content is for reference