MCP3201-BI/SN

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Analog to Digital Converters (ADCs) is a type of digital circuit used to convert analog-signals into the digital domain for downstream processing or for further analysis. The MCP3201-BI/SN IC is a 12-bit high-speed conversion rate, low power consuming, multi-channel analog-to-digital converter from Microchip Technology designed for a range of applications, such as industrial and automotive systems, medical and hand-held instruments. This device is smaller in size and lower in supply current making it suitable for mobile, battery-operated and power constrained systems. Our focus in this article is to explain its application field and working principle.

MCP3201-BI/SN Application Field and Working Principle

The MCP3201-BI/SN is a 12-bit, high-speed, low power, multi-channel, analog-to-digital converter with a fixed, internal reference. It has two differential or four single-ended/unipolar analog input channels. It also incorporates an internal sample-and-hold circuitry that makes this device a complete data acquisition system. The device allows the user to select the resolution, sampling rate, input mode, and chip-enable signal options for an application-specific, optimized solution.

The MCP3201-BI/SN is suitable for a wide range of applications including industrial, medical, instrumentation, motor control and automation. With its low power consumption and relatively high throughput rate, this device is ideal for mobile and battery-operated systems. The device supports I²C and SPI interfaces, allowing the user to easily connect the device with a host processor to obtain the sampling data.

The MCP3201-BI/SN operates in two modes: single-ended and differential. In single-ended mode, two inputs are referenced to the common mode voltage; in differential mode, two inputs are offset from each other by a fixed voltage. The user can select the desired mode and resolution by programming the configuration registers. The device is also protected against overvoltage and reversed supply conditions.

The working principle behind the MCP3201-BI/SN can be summarized as follows. The analog input signal is sampled and converted into a digital representation. This is followed by a 12-bit sigma-delta modulator which converts the analog signal into a digital signal with a resolution of 12-bits. The output from the sigma-delta modulator is then converted into a digital code. The device provides the user with an adjustable gain and an adjustable merging output, allowing the user to select the desired output range.

The MCP3201-BI/SN also includes an internal voltage reference. This reference can be programmed in order to set the output range. Moreover, the device also includes a built-in temperature sensor which is used to monitor the chip's temperature in order to prevent any potential damage that may be caused by over-heating. The data output from the chip is available in either asynchronous or synchronous formats.

The MCP3201-BI/SN is a low-cost, high-speed, low-power, multi-channel, analog-to-digital converter from Microchip Technology. It is ideal for use in a wide range of applications where the need for accurate, high-speed, high-resolution data acquisition is present. With its various features and options, the MCP3201-BI/SN provides the user with the flexibility to create an optimized data acquisition system.

The specific data is subject to PDF, and the above content is for reference