MCP3302-CI/P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Analog to Digital Converters (ADCs) are used to convert analog signals into digital signals. The MCP3302-CI/P is an Analog to Digital Converter (ADC) containing a 10-bit successive approximation register (SAR) A/D converter and a serial peripheral interface.

MCP3302-CI/P application field

The MCP3302-CI/P can be applied in a wide range of areas that require analog-to-digital conversion. It can be used in sensor systems for measuring temperatures, pressure and other physical parameters or for seismic sensing, electromagnetic sensing and much more. Other applications include automotive systems such as automotive control, AV entertainment systems, robotics, communications, and general-purpose applications.

MCP3302-CI/P working principle

The MCP3302-CI/P has a resolution of 10-bits, with an input voltage range of up to 5.5V. It has an input pin, which can be used to select either a single-ended or differential input. The microcontroller then starts a conversion process when an appropriate command is sent, either through the SPI interface or the on-board GPIO. The analog input is then applied to the SAR and compared to a reference voltage. If the comparison is detected, a bit is turned on and the voltage compared. This continues until all the 10 bits of the number is compared; the SAR then outputs the digital data.

The MCP3302-CI/P also contains a serial peripheral interface (SPI) for communication and control with a host microcontroller. The SPI contains four pins; SCLK (serial clock); DOUT (data out); DIN (data in); and CSB (Chip Select) pin. The CSB pin is used to select the chip prior to communication. The chip then switches the output of Toffset to supply an offset voltage equal to the ADC result. It then calculates a temperature value that is then outputted as a temperature reading.

The MCP3302-CI/P also contains a shutdown pin that is used to power off the ADC or put it in a low-power state. This allows the host to put the chip in a lowpower state when it is not in use, thus saving power.

In conclusion, the MCP3302-CI/P is an Analog-to-Digital Converter (ADC) with a resolution of 10-bits. It has a wide range of applications, from automotive control to AV entertainment systems and robotics. It utilizes a SAR and SPI for conversion and communication respectively, as well as a shutdown pin to put the chip in a low-power state.

The specific data is subject to PDF, and the above content is for reference